Automatic Garden Hose Timer for Hands-Free Watering

Set it once, then let it run

• A schedule that runs itself

  Five touch buttons, labelled SET, TIME, PROG, ON and OFF, plus arrow keys cover everything the schedule needs. Enter start times and run durations once, check the LCD, and the schedule holds. Changing it for a dry week takes a few presses, not a trip out to the tap.

• Sealed for steady flow

  An O-ring seal sits at the connection, and a mesh inlet filter catches debris before it reaches the valve. Keep the filter clear and the flow stays consistent. The arrow on the body shows which way water travels, so the timer goes on the right way the first time.

• Protected by a clear dome

  A transparent protective cover sits over the LCD, so you read the schedule at a glance without lifting anything off. The glossy green body and clear dome are built for outdoor use on a hose tap that sees daily duty.

From hose tap to hands-free in minutes

1. 1
   Check the seal and filter

   Make sure the O-ring sits in place on the connection, and look over the mesh inlet filter for debris. A clear filter keeps flow steady from the first cycle.

2. 2
   Attach to the hose tap

   Connect the hose quick-connect fitting and fit the timer to the tap. Follow the arrow on the body so water moves in the marked direction.

3. 3
   Set the times

   Use SET, TIME and PROG with the arrow keys to enter start times and run lengths. Keep runs short at first and adjust once you see how the lawn and beds respond.

4. 4
   Confirm and walk away

   Check the LCD shows the schedule you entered, then use ON and OFF to start or stop it manually when you need to.

Everything in the two-item set

• Irrigation timer controller×1

  Green plastic body with LCD, five touch buttons, mesh inlet filter and hose quick-connect fitting

• Clear protective cover×1

  Transparent dome that sits over the LCD display

Evenings with the hose end here

The hose you drag every evening

Every evening follows the same routine: uncoil the hose, walk the lawn, move it to the beds, then wonder whether the back corner got any water at all. Hand-watering works when you have time for it. It falls apart during busy weeks, which is exactly when plants need it most.

What the missed days cost

One forgotten evening shows up as a drooping tomato plant by Thursday. A few more and the lawn turns patchy along the sprinkler line. Drowning the garden later to make up for it wastes water and money. Consistency does more for a garden than a heavy hand on the hose.

Set it once, walk away

The timer attaches to your hose tap, and the five touch buttons with arrow keys set start times and run lengths on the LCD. Once the schedule is in, the garden waters itself while you cook dinner, travel, or stay indoors out of the heat.

What to expect over the first weeks

1. First use
   Timer set and connected

   Attach to the hose tap, set the start time and run length, and check the LCD shows your schedule before the first cycle.

2. Week 1
   Routine runs on its own

   The schedule starts at the set times, so you can check the lawn and beds without carrying the hose out each evening.

3. 30 days
   A watering habit that sticks

   A timed schedule is easier to keep than daily hand-watering. Adjust run times as the seasons and plant needs change.

Why this, not hand-watering