Replacement Braided Headphone Cable for ATH-M50X Series

Questions and answers
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
Replacement Braided Headphone Cable for ATH-M50X Series
New
1 / 7
About this itemAll characteristics
TypeConsumer Electronics > Headphone Accessories > Replacement Headphone Cables
From the seller

A braided replacement cable for Audio-Technica ATH-M40X, M50X, M60X and M70X headphones. The nylon sleeve resists kinks, the gold-plated plug seats firmly and reinforced strain relief protects both ends. Choose the plain version or the inline remote with volume and call buttons.

Read the full description

Description

A braided replacement cable for Audio-Technica ATH-M40X, M50X, M60X and M70X headphones. The nylon sleeve resists kinks, the gold-plated plug seats firmly and reinforced strain relief protects both ends. Choose the plain version or the inline remote with volume and call buttons.

Replacement braided cable that fits ATH-M40X/M50X/M60X/M70X headphones

Solves
  • broken or frayed original headphone cable
  • need for a longer or inline-remote cable replacement
  • tangling from thin stock cables

Get your headphones back in the game with a cable that lasts

Frayed, tangled, or too short? Swap in a braided replacement built for ATH-M40X, M50X, M60X and M70X and keep listening without the worry.

Braided construction where the original fails

Braided black nylon cable with inline remote and volume and call buttons

Braided sleeve that resists tangles

The woven nylon sleeve holds its shape when it is tossed in a bag or left on a desk. Thin stock cords pick up kinks within a few weeks of daily use. A braid keeps loops open and makes untangling a quick job instead of a slow one.

Close view of Type-C connector and gold 3.5mm plug with strain relief

Reinforced strain relief at both ends

Strain relief sits at the headphone end and the plug end, where bending does the most damage. The reinforced housings take the flex that would otherwise snap the conductors inside the sleeve.

Two black braided cables side by side, plain and inline remote versions

Gold-plated plug for a solid connection

The 3.5mm plug is gold-plated and TRRS-style, with a matte black housing that seats firmly in the jack. You get a clean, steady signal on both channels. The plain version and the inline remote version share the same plug, so you pick based on whether you want controls.

Connect it in four steps

  1. 1
    Seat the headphone end

    Push the connector into the socket on your headphones until it sits flush. A firm fit stops crackle on one side.

  2. 2
    Connect the source

    Plug the other end into your phone, laptop or interface. Play a familiar track.

  3. 3
    Check both channels

    Listen to left and right in turn. If you have the inline remote version, press volume and call to confirm they respond.

  4. 4
    Coil and tie

    Wind the cable in loose loops and secure it with the included cable tie.

Coil it right and it lasts longer

  • Coil in loose loops

    Wide loops keep the braid from kinking. Secure with the included cable tie.

  • Unplug by the housing

    Pull on the plug housing, never the wire, so the solder joints stay sound.

  • Keep sharp bends off the plug

    Tight bends at the strain relief are where cables fail first.

  • Hang it, do not wrap it

    Store the coil on a hook or in a bag instead of wound tight around the headphones.

Kids Headphones & Noise Reduction HeadphonesHeadphones with Built-In FM Radio for Music andOver-Ear HeadphonesMagnetic Charging Cables

Characteristics

Main
TypeConsumer Electronics > Headphone Accessories > Replacement Headphone Cables
Details

Reviews

Questions and answers

Will this fit my ATH-M40X, M50X, M60X or M70X?
w
Wanelo · seller

Yes, it is built as a direct replacement for the cable on these four Audio-Technica models. Check your headphones are one of these before ordering. Other brands use different connectors, so a different model will not seat properly.

Does the plug match my headphone's connector?
w
Wanelo · seller

The 3.5mm end is gold-plated and TRRS-style, so it fits phones, laptops and consoles with a standard 3.5mm jack. The other end is a Type-C style connector. Use the end that matches the socket on your headphones before you plug in.

Is the inline remote compatible with my phone or laptop?
w
Wanelo · seller

The remote has volume plus, volume minus and a center call button. The call button needs a device with a 3.5mm input that supports a mic, which covers most modern phones and many laptops. Volume controls depend on how your device handles inline remotes.

Why is this more expensive than a basic replacement cable?
w
Wanelo · seller

The price reflects the braided nylon sleeve, gold-plated plug and reinforced strain relief at both ends. A thin replacement often fails at the connector within weeks of daily use, and then you buy again. One braided cable that keeps working costs less per month of listening, and your headphones stay in use.

Can I use it for studio monitoring with an audio interface?
w
Wanelo · seller

Yes, for most desktop setups. The 3.5mm end plugs into a laptop, console or any interface with a 3.5mm headphone output. If your interface uses a 1/4 inch headphone jack, add a 3.5mm to 1/4 inch adapter.

Similar products

See all
Replacement Braided Headphone Cable for ATH-M50X Series
$59.90