$99.90
Free delivery · 7–14 days
Pure White Lace Front Bob Wig – Sleek Curly StyleZ Tilt Tripod Head: Multi-Angle Folding Camera Mount
New
1 / 6About this itemAll characteristics
TypePhotography accessories / camera tripod heads
Body materialAluminum alloy, anodized
FinishMatte black, gunmetal tones
Mounting thread1/4-inch threaded insert on base
BaseSlotted base for mounting
Quick release plateKnurled, with slot
From the seller
Fold the Z-arm into portrait, overhead, or low-profile in seconds, and check the frame with the built-in spirit level. The aluminum head turns one tripod into a full-angle rig for DSLR and mirrorless shooting. Two parts, one price, and no extra brackets to carry.
Read the full descriptionDescription
Fold the Z-arm into portrait, overhead, or low-profile in seconds, and check the frame with the built-in spirit level. The aluminum head turns one tripod into a full-angle rig for DSLR and mirrorless shooting. Two parts, one price, and no extra brackets to carry.
Multi-angle Z-tilt folding head that lets you shoot from any angle, from portrait to overhead to low-profile
Solves
- limited camera angles on standard tripod heads
- difficulty leveling camera for accurate framing
- need for quick camera attach and release
- slider and stand compatibility for dynamic shots
Shoot every angle without rebuilding your tripod
Stop re-rigging for each shot. Fold the Z-arm into portrait, overhead, or low-profile in seconds, and let the built-in level confirm the frame is straight.
One head, every angle your shot demands
Fold the arm to any tilt
The Z-arm moves from horizontal through to vertical portrait, and the same arm reaches overhead and low-profile frames. You do not swap parts or move the tripod base. For tabletop work, the camera sits over the subject. For location video, it drops low to the ground without a separate bracket.
Level it with the built-in bubble
The spirit level sits on the head body, so you check the horizon as you set the angle. That covers horizon and product framing without carrying a separate level. For architectural verticals, check the frame against a grid on your screen as well, since a bubble only reads the axis it is on.
Built from solid aluminum
The head is cut from aluminum alloy with an anodized matte black finish. Knurled grip pads and machined edges give you a firm hold in cold or sweaty hands, and the pivot joints move with a controlled feel rather than a loose swing. The listing does not publish a maximum load rating, so check your tripod's rating against your camera and lens before you mount a heavy telephoto.
Mount, level, tilt, shoot in four moves
- 1Mount the plate
Seat the quick release plate fully in the dovetail-style clamp channel, then test the lock with a gentle tug.
- 2Level with the bubble
Check the built-in spirit level while the head sits on the tripod. Adjust the base until the bubble centers.
- 3Fold the arm
Work the Z-arm to the angle you need: portrait, overhead, or low-profile. Lock it by hand with firm pressure.
- 4Shoot
Recheck the bubble and the camera's hold, then take the frame.
Head and quick release plate, ready to mount
- Z tilt head×1
Aluminum alloy body with folding Z-arm and built-in spirit level
- Quick release plate×1
Knurled plate with slot and 1/4-inch threaded insert
The angle you needed was not on the tripod
The angle you needed was not on the tripod
You have the light set and the subject placed. Then the brief changes to an overhead shot, and your ball head cannot get the lens there. You loosen the clamp, pull the camera off, and start re-rigging while the clock runs. Every re-level costs minutes, and every rushed level shows up as a crooked horizon in the edit.
One head that folds to the scene
The Z-arm swings from horizontal to upright, so the same base covers portrait, overhead, and low-profile frames. You fold the arm to the next angle, check the bubble, and shoot. The knurled quick release plate seats in the clamp channel, so the camera comes off and goes back on without a rebuild.
Ready for the next setup
The head is machined from anodized aluminum with a matte black finish and grippy pads. The pivots hold with firm, controlled resistance, so the camera stays where you put it. Next time a client asks for an angle your old head could not reach, the answer is a few seconds of folding.
Why a Z-tilt beats a standard ball head
| Z tilt head | Standard ball head | |
|---|---|---|
| Folds to portrait and overhead | Partial | |
| Built-in spirit level | — | |
| Re-level needed after each move | — | |
| Separate angle bracket needed | — |
Characteristics
Main
TypePhotography accessories / camera tripod heads
Details
Body materialAluminum alloy, anodized
FinishMatte black, gunmetal tones
Mounting thread1/4-inch threaded insert on base
BaseSlotted base for mounting
Quick release plateKnurled, with slot
Quick release clampDovetail-style channel
Tilt armZ-shaped, folding, multi-angle positions
LevelingBuilt-in spirit level bubble
SizeCompact
Reviews
Questions and answers
Will it hold my DSLR or mirrorless camera on a tripod or slider?
w
Wanelo · seller
It mounts any camera that uses a 1/4-inch thread on the plate. The listing does not publish a maximum load rating, so weigh your body and lens, then check that against your tripod or slider rating before you mount a heavy telephoto.
Does the quick release plate fit my existing tripod or slider system?
w
Wanelo · seller
The base has a 1/4-inch threaded insert and a slotted base for mounting, which covers standard tripod and slider setups. The dovetail-style clamp channel takes the knurled plate. If your existing plate uses a different profile, check it against the channel before you buy.
How accurate is the built-in spirit level for product framing?
w
Wanelo · seller
The bubble is good for horizon and tabletop framing, and it reads the axis it sits on. For architectural verticals, cross-check on your screen grid, since a bubble only confirms one direction.
How does this compare to a standard ball head?
w
Wanelo · seller
A ball head pivots in limited arcs and needs re-leveling after each move. The Z-arm folds to portrait, overhead, and low positions, and the spirit level is built in, so there is no separate bracket to carry or lose.
Is the aluminum build durable for location shooting?
w
Wanelo · seller
The body is solid aluminum alloy with an anodized finish, knurled grip pads, and machined edges. It is compact enough to pack between venues, and it is built to take daily location use. Check the lock tension now and then, as you would with any tripod part.
Similar products
See all
$99.90
Free delivery · 7–14 days
Clip-On 75mm Phone Macro Lens for Sharp Close-Up Detail
$119.90
Free delivery · 7–14 days
100mm Phone Macro Lens Clip for Close-Up Detail Shots
$109.90
Free delivery · 7–14 days
Doctor Strange Cosplay Costume With Layered Burgundy Style
Z Tilt Tripod Head: Multi-Angle Folding Camera Mount
$64.90