Waterproof Sink Gap Tape That Stops Mildew and Leaks
A sink edge that stays dry and wipes clean in one pass. This self-adhesive PVC strip seals the gaps where counters, stovetops, basins and toilet bases meet the wall, so spills stop at the surface and mildew has no seam to grow in. Peel, press and bend it around corners.
Read the full descriptionDescription
A sink edge that stays dry and wipes clean in one pass. This self-adhesive PVC strip seals the gaps where counters, stovetops, basins and toilet bases meet the wall, so spills stop at the surface and mildew has no seam to grow in. Peel, press and bend it around corners.
Waterproof seal that stops sink and counter gaps from leaking, growing mildew and collecting grime
- water seeping into sink and counter gaps
- mildew and black mold in seams
- oil and food spills under stove edges
- dirty gaps around toilet base
Seal the gap. Skip the mildew and the mess.
Tired of water soaking into the sink seam and black specks creeping along the toilet base? Press one strip in and the gap stays dry, clean and easy to wipe.
A seal that does the scrubbing for you

Liquid stays on top, not in the seam
The PVC strip covers the gap, so spills and standing water sit on the surface instead of soaking into the seam. Sauce that runs off the stove edge wipes away in one pass, and the crack underneath never gets a chance to hold moisture.

Printed patterns that look intentional
Clear, pastel and printed options sit neatly against white basins and sinks. The cartoon kitchen and leaf prints read as a deliberate detail rather than a patch, which matters when the strip sits in plain sight every day.

Bends around corners with ease
The strip is flexible enough to follow corners and curves without lifting. Cut it to length with scissors, lay it into the gap in one run, and the seal has no loose joints for water to find.
Clean, press, smooth. That's the whole job
- 1Clean and dry the gap
Scrub out the old grime, then dry the seam fully. Dust and moisture are what stop the adhesive from gripping.
- 2Peel a short section of backing
Expose only the length you can press at once so the adhesive stays clean.
- 3Press along the seam
Start at one end and lay the strip into the gap, keeping it flat with light pressure.
- 4Smooth from the center outward
Press with a finger along the full length, and bend the strip around corners and curves as you go.
Keep the seal fresh with one wipe
- Mild cleaner only
Wipe with a soft cloth and a mild cleaner. Harsh chemicals can break down the print and loosen the edges.
- Dry the edge
Wipe up standing water along the seal so the edge stays dry.
- Check the edges
Look at the ends once a month and press down any lifting spots.
- Do not soak
Keep the strip out of pooled water and avoid abrasive pads on the print.
Characteristics
Reviews
Questions and answers
Dry the surface first and it bonds firmly. The adhesive needs clean, dry contact, so wipe the edge and let it air dry before pressing. Once it is down, run your thumb along the full length so the adhesive settles into the texture. Wet or dusty surfaces cause most lifting, and that is a prep problem, not a flaw in the strip.
It is a PVC strip with a printed top layer, not a paper sticker. Wipe it with a mild cleaner and keep harsh chemicals away from the print, and the edges stay down. If a corner ever lifts, press it back and smooth from the center outward.
Yes. The strip cuts cleanly with scissors and bends around corners and curves without lifting. Cut it to the length of the seam, lay it flat, and press from the center outward so the strip carries no tension.
It is made for these spots. The strip sits flat along the base of a toilet or the edge where a basin meets the wall. Keep abrasive pads off the print, since scrubbing is the fastest way to wear the top layer.
Bleach cleans the surface for a day and never reaches the seam. Caulk needs careful tooling, takes time to cure and cracks over time. The strip is ready the moment it is pressed in. One roll covers a sink edge, a stove edge and a toilet base, so the cost per seam stays low next to weekly scrubbing and repeat repairs.
Similar products
See all













