USB-C 2-in-1 Charging Cable: Charge Two Devices at Once
One cable that charges two USB-C devices at the same time. Plug the USB-A end into a charger or power bank, connect a phone and a controller, and both start charging. The 3 m length reaches from the outlet to the bed or desk.
Read the full descriptionDescription
One cable that charges two USB-C devices at the same time. Plug the USB-A end into a charger or power bank, connect a phone and a controller, and both start charging. The 3 m length reaches from the outlet to the bed or desk.
One cable charges two USB-C devices at the same time
- carrying multiple charging cables
- sharing one wall or power-bank port between two devices
- long 3 m reach for charging away from the outlet
Charge both devices at once from one port
Stop swapping cables and fighting over the outlet. One 3 m cable powers your phone and controller together, at the bedside, the desk, or on a power bank.
One cable, two USB-C plugs, one port

Two USB-C plugs, one port
One USB-A plug feeds a Y-split with two USB-C connectors. Plug the USB-A end into a charger or power bank, connect a phone and a controller, and both start charging. No second cable and no second port.

3 meters of reach
The cable runs 3 m (10 ft) from the outlet to the bed or desk. You can charge from across the room without an extension cord, and the molded connector housings stay neat at the plug end.

Tie it and forget it
The included cable tie keeps the coil bundled in a bag or drawer, so it comes out untangled the next time. Loose loops are enough, and the cable never needs a knot.
Plug in once, charge both
- 1Run the 3 m cable to your spot
Route the long run from the outlet to the nightstand, desk, or couch before you plug anything in.
- 2Plug the USB-A end into a charger
Use a wall adapter or power bank with enough output for both devices. A higher-output charger gives each device a faster charge.
- 3Connect each USB-C plug
Push each USB-C connector into its device. Both should show a charging indicator within a few seconds.
- 4Bundle the coil when you are done
Hold the plug housing when you pull it out, then loop the cable loosely and close it with the tie.
Everything you get
- 2-in-1 USB-C charging cable×1
3 m / 10 ft, USB-A to two USB-C
- USB-A male plug×1
Input end for a wall charger or power bank
- USB-C male connectors×2
One per device, on molded housings
- Cable tie×1
Keeps the coil bundled between uses
Characteristics
Reviews
Questions and answers
Not quite. Both devices draw from one USB-A port, so the output is shared. Each device charges more slowly than it would alone on a high-output charger. Pair it with a wall adapter or power bank that has enough output for both, and the wait stays short overnight.
It works with any device that charges over USB-C, including phones, game controllers, tablets, and e-readers. The USB-A end fits standard wall adapters and power banks. Check the output rating on your charger if you plan to charge two larger devices at once.
The USB-A plug is the input end, so the cable needs a USB-A port on the charger or power bank. A USB-C wall charger will not accept this plug without a USB-A to USB-C adapter.
Yes. The cable runs 3 m (10 ft), which covers an outlet on one side of the room and a nightstand or bed on the other. Most bedside and desk setups need no extension.
It is a budget-priced cable with a soft matte jacket and molded connector housings. Hold the plug when you unplug it, avoid sharp bends at the Y-split, and check the connectors now and then for wear. Careful handling is what keeps it working for months.
Two cables cost you two plugs, two ports, and two tangles in the bag. This cable uses one port and one bundle. For the price of a single cable, you free up an outlet every night and keep one tidy coil in your bag.
Similar products
See all






