USB 3.0 Printer Sharer for Two Computers, 4 Ports
Your desk should not depend on how often you crawl behind it. Share four USB devices between two computers, then move them all with one press of the glossy front button. The LEDs show which PC is live, so your printer and keyboard are always where you left them.
Read the full descriptionDescription
Your desk should not depend on how often you crawl behind it. Share four USB devices between two computers, then move them all with one press of the glossy front button. The LEDs show which PC is live, so your printer and keyboard are always where you left them.
Share 4 USB devices between 2 computers with one button press
- Constantly plugging and unplugging USB devices
- Needing a separate printer, mouse or keyboard for each PC
- Limited USB ports on a desk setup
Share Every USB Device with one press
Tired of swapping cables every time you change computers? Share four USB devices between two PCs and switch in a single push, so your desk just works.
One switch, four devices, two computers
- Four ports, one press
Four USB 3.0 Type-A ports sit in a row with blue inserts, so a printer, a keyboard, a mouse and a USB drive can all share one selector. Each device stays on the desk and moves to whichever computer is active.
- Know which PC is live
Two status LEDs show whether PC 1 or PC 2 is active. One glance at the selector tells you where your printer and keyboard are right now, without tracing cables behind the desk.
- Plug and play switching
The push-button selector moves every connected device in one press. Nothing gets unplugged, nothing gets crawled behind, and the switch runs plug-and-play.
Plug in once, switch with one press
- 1Connect both computers
Run the USB 3.0 Type-A cables from the selector to PC 1 and PC 2, one set per computer.
- 2Plug in your devices
Put the printer, USB drive, keyboard and mouse into the four blue-ringed ports on the selector.
- 3Press to switch
Press the front button to move all four devices to the other computer. The LED shows which PC is active.
Everything you need to connect both PCs
- USB switch selector unit×1
Glossy black housing with four USB 3.0 downstream ports and a push-button selector.
- USB 3.0 Type-A male cables for PC 1×2
Connects the selector to the first computer.
- USB 3.0 Type-A male cables for PC 2×2
Connects the selector to the second computer.
Characteristics
Reviews
Questions and answers
The packaging lists compatibility with most USB devices, and the usual office loads are covered: printers, USB drives, keyboards and mice. Power-hungry devices should keep their own power supply, because the selector passes data and does not add power for them.
No switching software is needed. The selector is plug-and-play, so the button moves the devices. Your printer still needs its normal driver on each PC, the same as it would with a direct connection.
A second printer or keyboard duplicates hardware you already own, and a generic hub still makes you replug everything. One selector moves four devices between both computers and clears the cable clutter from behind the desk. Compared with a second printer, the cost is small for what it removes from your week.
Wait for it to finish. Pulling a USB drive or printer mid-transfer can corrupt a file or interrupt a print job, so press the button once the job is done.
Similar products
See all




