USB 3.0 Hard Drive Docking Station for 2.5 and 3.5 SATA
Swap a loose 2.5 or 3.5 inch SATA drive in seconds and keep your PC closed. The USB 3.0 dock runs at 5Gbps, with a clear tray and an LED that shows the drive is live. Everything you need is in the box, so the first transfer can start the same day.
Read the full descriptionDescription
Swap a loose 2.5 or 3.5 inch SATA drive in seconds and keep your PC closed. The USB 3.0 dock runs at 5Gbps, with a clear tray and an LED that shows the drive is live. Everything you need is in the box, so the first transfer can start the same day.
Plug-and-dock access to 2.5 and 3.5 inch SATA drives over USB 3.0 at 5Gbps
- Needing to open a PC case to access a SATA drive
- Hard drive cables and enclosures are fiddly to set up
- Compatibility worries across Windows, Mac and Linux
Plug in any SATA drive and skip the case
Stop opening your PC every time you need a loose drive. Drop it in the dock, press down, and back up, clone, or recover from your desk.
Tool-free access to every drive you own

Drop in, press down, and go
The docking slot takes the drive with one press and lets it lift out with no tools. Line the drive up with the slot, press straight down, and the connection is made. Nothing to screw, clip or route.

USB 3.0 at 5Gbps
The USB 3.0 interface runs at 5Gbps, so copies, backups and clone jobs move at a pace you can plan around. The Type-B end goes into the dock and the Type-A end into your computer. Rubber anti-slip mats under the base keep it planted while the drive spins.

Clear tray, teal LED
The clear tray lets you see the drive seated before you power on. The teal LED shows the connection status, so you know the drive is live without checking your file manager. The gloss black body keeps the look tidy next to a laptop or monitor.
Four numbers that matter
- 5GbpsUSB 3.0 transfer rate
- 2.5 / 3.5Inch SATA drive sizes on one dock
- 3Items in the box
- 142 x 74.5 x 57.5 mmDock dimensions
Dock a drive in four steps
- 1Connect the power
Plug the power adapter into the DC port on the back of the dock. The drive runs from this supply, so connect it before anything else.
- 2Link the computer
Connect the USB 3.0 Type-B end to the dock and the Type-A end to a USB port on your computer.
- 3Switch on
Press the ON/OFF button. The teal LED lights up when the dock is ready.
- 4Drop in the drive
Line up a 2.5 or 3.5 inch SATA drive with the slot, press down until it connects, and open it in your file manager. To remove it, eject the drive in your operating system first, then lift it out.
Dock, adapter, and cable, ready to go
- Docking station×1
Gloss black base with clear drive tray and teal LED
- Power adapter×1
Connects to the DC port on the rear panel
- USB 3.0 Type-A to Type-B cable×1
Links the dock to your computer
The case stays closed

The case stays closed
Reading one file from a loose drive used to mean powering down the tower, unscrewing the side panel and hunting for a free SATA cable. Most people just gave up and let the drive sit in a drawer. The dock removes that whole detour.

One dock, two drive sizes
The same tray takes 2.5 inch and 3.5 inch SATA drives, so the laptop drive and the old desktop archive no longer need separate housings. You swap drives by lifting one out and dropping the next one in.
Ready on day one
The box holds the dock, the power adapter and the USB 3.0 cable, so there is nothing to hunt for on setup day. Plug in, switch on, and the teal LED confirms the drive is ready for work.
Skip the case and the cable tangle
| ORICO USAP Dock | USB-to-SATA cable | Opening the PC case | |
|---|---|---|---|
| Tool-free drive loading | — | — | |
| PC case stays closed | — | ||
| Takes 2.5 and 3.5 inch drives | Partial | ||
| Single cable run on the desk | — | ||
| Clear view of the drive tray | — | — |
Characteristics
Reviews
Questions and answers
Yes. The packaging lists compatibility with most major systems, and the dock connects over a standard USB 3.0 Type-A to Type-B cable. Windows, Mac OS and Linux all see the drive once it is docked.
Yes, one dock covers both sizes. Drop in a laptop 2.5 inch drive or a desktop 3.5 inch drive, and the same slot holds either one.
Insert and lift out with the PC running, but eject the drive in your operating system first. Pulling a drive mid-copy can corrupt files or interrupt a clone that is still writing.
A cable leaves you with loose wires and a drive that sits on the desk. The dock holds the drive in a slot with rubber anti-slip mats, a clear tray, a power switch and an LED, so the drive stays steady while you work.
An enclosure ties one housing to one drive size. This dock takes both sizes, so one purchase covers the 2.5 inch laptop drive and the 3.5 inch archive drive. If you handle more than one loose drive a month, the time saved on opening cases and untangling cables adds up quickly.
The docking station, a power adapter and a USB 3.0 Type-A to Type-B cable. Nothing else is needed to start a transfer.
Similar products
See all





