J3 Wireless Lavalier Mic — 3‑in‑1 Interface & Noise Reduction

The Triple‑Threat Engine

Universal Compatibility

USB‑C, Lightning, and 3.5mm jacks cover every major interface. The receiver module swaps connectors in a click — no adapters, no latency. Use the same system for a DSLR, iPhone, and laptop without altering your signal chain.

Active Noise Cancellation

Real‑time DSP algorithms analyze ambient sound and suppress unwanted noise up to 25 dB without coloring your voice. The result is broadcast‑ready audio even in crowded halls or windy outdoor shoots.

Clip‑and‑Go Versatility

The magnetic transmitter snaps anywhere, and the detachable capsule lets you replace foam windscreens instantly. Weighs just 28 grams — you’ll forget it’s there until you hear the playback.

Measurable Performance

• 3Device interfaces (USB‑C, Lightning, 3.5mm)
• 2Simultaneous transmitters supported
• 28Grams — transmitter unit weight
• 6Pieces included in the kit

Ready in 30 Seconds

1. 1
   Choose your connector

   Slide on the USB‑C, Lightning, or 3.5mm plug that fits your device. The receiver snaps securely with a magnetic lock.

2. 2
   Power on the units

   Press and hold the button on both transmitter and receiver. The LED display glows solid green when they pair automatically.

3. 3
   Clip and position

   Attach the transmitter to a shirt collar within 20 cm of your mouth using the lavalier clip or magnetic back. Slide on the foam windscreen if outdoors.

4. 4
   Check your levels

   Speak normally and watch the receiver’s LED — a steady green bar means optimum gain. If it flashes red, adjust your distance slightly.

5. 5
   Hit record

   Launch your camera/audio app and start recording. The mic is instantly active; no pairing button, no latency.

A Complete Audio Suite

• Wireless transmitter×1 or ×2

  Omnidirectional mic with magnetic clip

• Receiver module×1

  Dual‑connector base with LED display

• USB‑C adapter×1

  For Android, laptops, cameras

• Lightning adapter×1

  For iPhone and iPad

• 3.5mm jack adapter×1

  For DSLRs, mixers, recorders

• Foam windscreen×1 per transmitter

  Slips over capsule for outdoor use

From Frustration to Freedom

Tangled Wires, Endless Adapters

You’re ready to record, but your mic only works with one device. Digging for dongles kills the moment. The cable snags, background hum creeps in, and your audio feels amateur. Sound is everything — and it’s letting you down.

One System, All Your Devices

The J3 breaks the compatibility barrier. Snap on the USB‑C, Lightning, or 3.5mm connector, and you’re paired with any camera, smartphone, or laptop in seconds. No dongles, no guesswork. Two transmitters talk to one receiver so you can interview or co‑host with studio‑grade clarity.

Your Voice, Undisturbed

Intelligent noise reduction reads the room and filters out traffic, wind, and chatter. The LED display confirms a clean signal in real time. Walk, gesture, create — the wireless range gives you total mobility. From live streams to documentary shoots, you hear only what matters.

J3 vs Generic Wired Lavs