Fingertip Pulse Oximeter with OLED Display and SpO2

Clear SpO2 and pulse, read in seconds

• Read in 8 seconds

  The device shows SpO2 and PR in about 8 seconds, so a check fits between tasks. Clip it on, press the single button, and the numbers appear on the two-colour OLED while the pulse waveform runs across the screen as the sensor locks on.

• Read from any angle

  The screen rotates through 6 directions, so you can turn it toward yourself or toward a caregiver sitting across the table. The labelled SpO2 and PR readout stays easy to read from more than one side.

• A kit that travels

  The fingertip oximeter, carry box, user manual, hanging rope and sponge holder fit together in one set. The lanyard hole lets the device hang from a bag strap, so it stays with you on the bike, at the gym, or on a flight.

One button, one clip, one reading

1. 1
   Warm up the finger

   Warm your hands first and remove nail polish from the test finger. Cold circulation and dark polish can weaken the light signal.

2. 2
   Clip it on

   Slide a fingertip into the clip sensor and rest your hand still on a table. Movement adds noise to the reading.

3. 3
   Press once

   Press the single button to switch on. The OLED starts measuring and the pulse waveform appears on screen.

4. 4
   Read the SpO2 and PR

   Wait about 8 seconds for the numbers to settle, then note the SpO2 and PR values. Turn the display to the angle that suits whoever is reading.

Everything in one carry box

• Fingertip pulse oximeter×1

  Two-colour OLED display, weighs 50 g

• Carry box×1

  Keeps the device and accessories together

• User manual×1

  Explains the single button and screen modes

• Hanging rope×1

  Threads through the lanyard hole

• Sponge holder×1

  Keeps the device steady inside the box