Live Sound Card Mixer for Podcasts, Streams & Karaoke

Every knob you need, lit up in front of you

Shape your voice with knobs you can see

Mic and Reverb sit beside Treble, Mid and Bass, and each knob has an RGB ring that shows where it sits. You set the tone by turning, not scrolling through menus. Record and Special effect knobs share the same row, so the controls you touch most are always in view.

Fun effects, one tap away

Twenty special effect pads light up in colour and fire Giggle, Yell, Applause, Karaoke and more. Mode buttons such as Electric sound and Voice change work the same way, so a playful switch takes one press. You skip the effects software entirely and keep your attention on the conversation.

Balance mic and music live

Accompany and Monitor sliders sit beside live level meters, so you hear your voice and backing track as you speak. Plug a headset into the Headset port, send the track through Accompany, and keep the blend steady. A 3.5mm headphone works well as the monitor feed.

The numbers on one board

• 20special effect pads
• 2condenser mic inputs
• 5V 1Acharging input
• 5items included

From plug-in to first recording in minutes

1. 1
   Connect the board

   Use the USB-C cable for your phone, laptop or tablet, or pair over Bluetooth with the BT button. Add your microphone to Condenser mic 1 or 2, or to the Dynamic microphone port.

2. 2
   Pick a mode

   Press Recording studio or PRO for a clean voice, or Karaoke and Voice change for something livelier. Modes change the sound, so try a few before you settle.

3. 3
   Set levels with the meters

   Start the Mic knob at the middle, speak at your normal volume, and raise it until the level meters peak just below the top. Balance Accompany against your voice using the Monitor slider.

4. 4
   Record or go live

   Press Record for your episode or take, or start your stream. Use the effect pads when a moment calls for a laugh or a round of applause.

Everything to plug in and go

• Live sound card×1

  Compact board with knobs, mode buttons and effect pads

• USB-C cable×1

  Connects the board to your phone, laptop or tablet

• 3.5mm audio cable×2

  For headsets, earphones or a second device

• User manual×1

  Covers the modes, ports and first setup

Flat voice in, full sound out

The voice you keep hearing back

You hit record, speak with real energy, then press play and hear something small and tinny. The mic is fine. The problem is that nothing shapes your voice before it reaches the file, so every episode sounds like a rough draft. You start guessing at levels and hoping the next take lands better.

One board, no software scramble

F999 puts the fix on the desk in front of you. Mic, Reverb, Treble, Mid and Bass are real knobs, and the mode buttons handle the rest. Bluetooth, USB-C and 3.5mm inputs mean your phone, laptop or tablet connects without a tangle of adapters. The shaping happens live, so you hear the change as you make it.

Your next session, sounding like you meant it

Next episode, your voice sits right in the mix. Your stream gets a laugh from a Giggle pad at the right moment. Karaoke night moves from one singer to the next with a tap on Voice change, and the room keeps singing. The board does the work, and you get to be the host.

One board instead of a desk full of gear