Wireless Lavalier Microphone 1‑to‑2 — Studio‑Quality Audio
Finally, mobile audio that matches your video. This wireless lavalier system gives you two microphones, a universal receiver, and cables for every device — so you can record interviews, livestreams…
Read the full descriptionDescription
Finally, mobile audio that matches your video. This wireless lavalier system gives you two microphones, a universal receiver, and cables for every device — so you can record interviews, livestreams…
Professional 1-to-2 wireless system for flawless live streaming audio with noise cancellation
- unwanted background noise during recording
- cable tangle and mobility restriction
- incompatibility across different devices
- audio quality loss in mobile streaming
Studio-Quality Sound for Every Take
Untether your creativity with a wireless dual‑mic system that erases background noise and connects to any phone, camera, or tablet. Record interviews, livestreams, and content that sounds as professional as it looks.
Three Things That Transform Your Sound

Record Two People, Perfectly Synced
Film an interview, a co‑hosted podcast, or a live reaction video without swapping mics. Both transmitters feed into a single receiver, so your edit is already in sync.

Plug Into Any Device, Instantly
USB‑C, Lightning, and 3.5 mm connectors cover iPhones, Android phones, cameras, and laptops. Swap the cable in a second — no extra adapters, no software drivers.

Silence the World Around You
A sensitive capsule paired with an acoustic windscreen cuts wind buffeting, traffic rumble, and room echo. Your voice stays front and center, even on a busy street.
A System Built for Creators
- 2Wireless transmitters
- 1Universal receiver
- 3USB‑C, Lightning, 3.5mm
- 2Simultaneous recording
Three Steps to Wireless Audio
- 1Charge the transmitters
Each microphone has a micro‑USB port. Use the included cable to give them a full charge (light turns solid when done). A full charge lasts roughly 6 hours of continuous use.
- 2Plug the receiver into your device
Choose the connector that fits your phone, tablet, or camera — USB‑C, Lightning, or 3.5mm — and snap it onto the receiver. Insert the receiver firmly into the device’s port.
- 3Pair and clip on
Press the power button on both transmitters and the receiver. The status lights will blink, then go solid once paired. Clip one mic to your collar, the other to your guest, and open any recording app — you’re live.
Everything You Need
- Wireless lavalier microphone (transmitter)×2
Clip‑on design, pre‑paired
- Universal receiver×1
Status LED, detachable connector
- USB‑C adapter cable×1
For Android phones, iPad Pro, cameras
- Lightning adapter cable×1
For iPhone and iPad
- 3.5 mm TRS adapter×1
For DSLR/mirrorless cameras and audio recorders
- Micro‑USB charging cable×2
One per transmitter
- Foam windscreen×2
Each fits snugly over the mic capsule
How a Silent Struggle Became a Creative Edge
The Cable Prison
Traditional wired lav mics chain you to your phone. Adapters dangle, connectors mismatch, and every movement risks yanking out the jack. Meanwhile, your phone’s built‑in mic picks up wind, echo, and the neighbour’s lawnmower.
A Signal That Travels Light
We stripped away the wires but kept the fidelity. A pocket‑sized receiver plugs directly into USB‑C, Lightning, or 3.5 mm, instantly linking to two transmitters. No app, no pairing ritual — just power on and your voice fills the timeline, clean and present.
The Take That Needs No Retake
One receiver, two transmitters, zero noise. You forget the gear is there and focus on the moment. Interviews, livestreams, TikToks — your audio is now the part you never have to fix in post.
Simple Care, Long Life
- Keep dry
Not waterproof. Wipe gently if splashed and allow to air dry.
- Clean the windscreen
Remove the foam, wash with mild soap and water, and let dry completely before replacing.
- Store charged
If not using for weeks, leave the transmitters at about 50% battery; avoid deep discharge.
- Unplug carefully
Hold the connector by the plug, not the cable, when disconnecting the receiver.
Characteristics
Reviews
Questions and answers
Yes. The receiver comes with a Lightning connector. Just plug it in, turn on the transmitters, and the iPhone recognises it as an external microphone — no app required.
Absolutely. That’s the point of the 1‑to‑2 system. Both transmitters pair to the receiver simultaneously, and the signal comes through as a single stereo or dual‑mono track, depending on your recording app.
In open air, you can walk about 15 metres away without losing connection. Walls and heavy interference will reduce that, but for most indoor and close‑range outdoor shots it stays rock‑solid.
It’s real, but it’s acoustic, not digital. The microphone capsule is tuned to reject off‑axis sound, and the foam windscreen physically blocks wind and breath noise. It won’t turn a construction site into a library, but it dramatically cuts the low‑rumble and hiss that ruin phone audio.
Two microphones unlock interviews, co‑hosts, and backup audio. Plus you get all three connectors in the box, so you’re covered when you switch phones or add a camera. Over two years, it replaces several single‑purpose adapters and cables.
No. Power on both transmitters and the receiver; they auto‑pair. The receiver draws power directly from your device’s port, so there’s no internal battery to charge.
Similar products
See all






