Electric Makeup Brush Cleaner with Automatic Drying

Five cleaning levels, one touch to start

Five levels, one touch

Five cleaning intensity levels let you match the cycle to the job. A low level handles a day of powder and gloss, and a higher level lifts the heavier build-up from full-coverage foundation. The panel is touch-sensitive, so one press starts the cycle.

Dry in 2 or 5 hours

The fan runs on a 2H or 5H timer. Pick 2H when the set is needed again the same day, or 5H for a thorough dry overnight. The holder slots stand each brush upright, so ferrules and bristles dry apart.

Clear bowl, rose-gold finish

The transparent acrylic bowl lets you see the cycle at a glance. The rose-gold ring frames the rim and keeps the matte white base looking tidy on a clean vanity.

Three settings that run the whole cycle

• 2Hfan drying timer
• 5Hfan drying timer
• 1-5cleaning intensity levels

Load, choose, and let it finish

1. 1
   Load the brushes

   Set the used brushes on the silicone spinner inside the clear bowl, with the tips facing the centre so they settle without crowding.

2. 2
   Choose a cleaning level

   Start on a lower level for a light refresh. Move up toward level 5 for heavy product build-up, and keep delicate brushes on the gentler settings.

3. 3
   Pick a drying timer

   Press for the 2H or 5H fan drying timer, depending on how soon the set is needed again.

4. 4
   Let the cycle finish

   Leave the machine to run. Wipe the bowl dry before the next load, then store the brushes once the timer ends.

Everything the cleaning cycle needs

• Cleaning and drying machine×1

  White base with clear acrylic bowl and rose-gold ring

• Silicone cleaning spinner×1

  Soft mat that holds brush tips steady during a cycle

• Brush holder slots

  Grooved slots that stand brushes upright while they dry

• USB cable×1

  Short cable for the USB plug-in power

A sink full of soap, then a set ready by morning

The sink can wait no longer

Brushes come off the face caked with product, and washing a full set by hand takes most of an evening. Soap at the sink misses the residue near the ferrule, and brushes left damp for days hold product and start to smell. Every session ends the same way: a sink full of suds, a towel covered in wet bristles and the set pushed to the back of the drawer.

One machine, one cycle

A single touch panel runs the whole cleaning cycle. You pick a level from 1 to 5 for light refreshes or heavy product build-up, and the rotating silicone spinner keeps brush tips steady inside the clear bowl. The sink stays empty, and the towel stays dry.

A set that is ready tomorrow

When the wash ends, the fan takes over on a 2H or 5H timer while the brushes stand upright in the holder slots. The bristles dry without pressing against each other, so the full set is ready for the next morning without another round of washing.

Care for the bowl, mat and holder

• Wipe the bowl dry

  Empty and dry the clear bowl after every cycle so water does not sit in the base before the next load.

• Rinse the silicone spinner

  Rinse the spinner after each run to clear product, then let it air dry before it goes back in.

• Dry the holder slots

  Let the holder slots dry fully before storing brushes so moisture does not collect at the base.

Why Spin Beats the Sink