Dual SD and microSD Card Reader, USB 3.0 Fast Transfer
Two cards import in one session, and the cover keeps them protected between shoots. The reader is a compact USB 3.0 plug that fits a bag pocket and swivels out of the way when you pack up.
Read the full descriptionDescription
Two cards import in one session, and the cover keeps them protected between shoots. The reader is a compact USB 3.0 plug that fits a bag pocket and swivels out of the way when you pack up.
Read two memory cards at once with fast USB 3.0 transfer in a compact swivel design
- need for multiple card readers
- slow file transfer over USB 2.0
- card damage or loss from exposed slots
- bulky or exposed USB plug when stored
Import both cards at once and keep every card covered
Stop swapping readers and waiting on slow copies. Plug in one compact USB 3.0 reader, read SD and microSD together, and let the built-in cover protect each card between jobs.
Two cards, one port, zero swapping

Two cards, one import
Both the SD slot and the TF/microSD slot read at the same time. Copy from two cards in one session instead of swapping a single-slot reader every time a new card comes out of the camera. The top slot takes SD, SDXC and MMC. The other takes TF and microSD, and each slot is labeled so the right card goes in the right place.

Cards that stay covered
The attached cover slides over both slots, keeping dust off the contacts and stopping a loose microSD from working its way out of the reader. It stays attached to the body, so it does not get lost in a bag pocket. Close it after each import and the cards stay protected until the next shoot.

Plug in, swivel around
The USB 3.0 plug rotates 360 degrees on its hinge. Angle it into a tight port on the side of a laptop, then fold it back when you pack the reader away. Nothing sticks out of the bag and the connector does not get bent in transit. Pair it with micro sd cards from the same desk drawer and the whole kit stays in one pocket.
From camera card to laptop in four steps
- 1Plug in the swivel plug
Rotate the USB 3.0 plug to the angle your port needs, then connect it to a USB 3.0 port on the laptop or desktop.
- 2Insert both cards
Check the slot label first. SD, SDXC and MMC go in the top slot. TF and microSD go in the other. Push until the card sits flush.
- 3Copy the files
Both cards appear as drives. Drag the photos or video across as usual, and wait for the copy to finish before you touch anything.
- 4Eject and close the cover
Use your system's eject option, pull the cards out, and slide the built-in cover shut so the slots stay clean until the next import.
Small enough for a laptop bag pocket
- 7 cmLength
- 2 cmWidth
- 1 cmThickness
Sized to slide into a laptop bag pocket beside your cables
Characteristics
Reviews
Questions and answers
Yes. The reader has two slots. The top slot takes SD, SDXC and MMC cards, and the other takes TF and microSD. Both cards can be inserted at once and copied in the same session.
SDXC is supported. Most current laptops and desktops detect both cards as drives as soon as the reader is plugged into a USB 3.0 port, so no software install is needed.
Yes. The reader is a USB 3.0 device, so it runs fastest on a USB 3.0 port. Plugged into an older USB 2.0 port, large files will copy at the slower USB 2.0 speed.
The cover slides over both slots and stays attached to the body. It keeps dust and debris off the card contacts and stops a loose microSD from falling out in a bag. Close it after every import.
A single-slot reader means one card per trip and a second reader for the other card. If you import two cards a week, this one handles both in a single plug and keeps them covered, so you stop buying spare readers and stop losing microSD cards.
Similar products
See all





