Aluminum SATA Hard Drive Enclosure, USB 3.0 Fast Transfer
Stop leaving a bare drive loose on the desk. This brushed aluminum enclosure holds your SATA drive in a solid metal shell, connects with one cable and runs at USB 3.0 speeds, so each backup finishes without guesswork. It supports drives up to 20TB, so the case keeps working as your archive grows.
Read the full descriptionDescription
Stop leaving a bare drive loose on the desk. This brushed aluminum enclosure holds your SATA drive in a solid metal shell, connects with one cable and runs at USB 3.0 speeds, so each backup finishes without guesswork. It supports drives up to 20TB, so the case keeps working as your archive grows.
Secure, high-speed desktop storage for large SAS/SATA hard drives over USB 3.0
- connecting bare hard drives to a computer
- slow or unstable data transfers
- needing a single cable for USB-A or USB-C laptops
- storing large-capacity drives up to 20TB
Turn any bare SATA drive into secure, fast desktop storage
Before: a loose drive, a tangle of cables, and backups you keep postponing. After: one solid aluminum case, one cable, and transfers you can actually trust at your desk.
A solid aluminum shell for your bare drive
- Solid aluminum shell
The housing is all metal, with a brushed silver finish that resists fingerprints and looks at home beside a laptop. Bumps against the desk land on aluminum instead of a flexing plastic shell, so the drive inside stays put.
- Vented for steady transfers
Perforated vents on the housing release heat while the drive works through a long copy. Keep the grille clear of papers and cables, and the metal body carries heat away from the drive during big backups.
- USB 3.0 at 5Gbps
The USB 3.0 to SATA 3.0 link is rated at 5Gbps. That is a clear step up from USB 2.0 when you are moving folders of RAW photos, video projects or disk images. The transfer bar moves, and you spend less time waiting.
The three numbers that drive the build
- 5GbpsUSB 3.0 transfer speed
- 20TBSupported drive capacity
- 12V/3AStable power supply
Four steps from bare drive to backup
- 1Slide the drive in
Seat your 2.5-inch SATA drive in the aluminum enclosure until it sits flat.
- 2Power the adapter
Plug in the 12V/3A adapter first, then check that the blue power LED lights up.
- 3Connect one cable
Use the 2-in-1 cable for USB-A ports or the USB-C cable for USB-C ports, and link it to your laptop or desktop.
- 4Eject before unplugging
When the transfer finishes, eject the drive from your operating system before you disconnect the cable.
One box, every cable you need
- Drive enclosure×1
Brushed aluminum shell with vent grille and blue power LED
- 2-in-1 USB cable×1
USB-C and USB-A connectors for either laptop port
- USB-C to USB-C cable with adapter×1
Matte black cable with adapter for USB-C ports
- 12V/3A power adapter×1
3C certified power supply for steady transfers
From a loose drive to a backup you can count on

The loose drive on the desk
Most people keep a bare drive somewhere between the keyboard and the coffee mug. Every backup means hunting for the right cable, hoping the connection holds, and watching the progress bar for signs of trouble. One bump or one dropped cable can cost you files you cannot rebuild.

One metal case, one cable
The drive slides into a brushed aluminum shell with a perforated grille and a blue power LED. A 2-in-1 USB cable covers USB-A and USB-C laptops, so the drive connects without a dock or an open PC case. The drive stops being a loose object and becomes a storage device you can plug in and leave alone.

Backups you can trust
With USB 3.0 at 5Gbps and a 12V/3A adapter keeping power steady, the transfer runs without the stutter that makes you nervous. The enclosure supports drives up to 20TB, so the same case still fits when your archive grows. Set the copy running and get back to work.
Metal enclosure versus loose drive
| This | Loose drive | Plastic case | |
|---|---|---|---|
| Metal shell | — | — | |
| Vented heat path | — | Partial | |
| Single cable setup | — | Partial | |
| Protection from desk bumps | — | Partial |
Characteristics
Reviews
Questions and answers
Yes, the enclosure is built for 2.5-inch SATA drives. Slide the drive in, connect the 12V/3A adapter, then link the cable to your laptop. It supports drives up to 20TB.
Connect the drive and your computer should show it as an external disk. A brand new drive may need to be initialized and formatted in your operating system's disk tool before the first use.
The shell is solid aluminum with perforated vents that let heat out. Keep the grille clear of paper and cables during a long copy and the drive stays in its cooling path.
You get a brushed aluminum body, a 2-in-1 USB cable, a USB-C cable with adapter and a 3C certified 12V/3A power adapter in one box. A plastic case that flexes and traps heat often leaves you buying cables or a separate power source later. Spread over years of backups, the metal case costs less per use than replacing a cheap enclosure twice.
Use the 2-in-1 cable for USB-A laptops. It has both connector types, so the USB-A end works on older machines. Keep the cables tidy with cable organizers on a busy desk.
Yes. The enclosure is rated for high-capacity drives up to 20TB, so your archive can grow without a new case.
Similar products
See all




