Adjustable Bed Frame Anti-Shake Stopper for Headboards

Questions and answers
Adjustable Bed Frame Anti-Shake Stopper for Headboards
Adjustable Bed Frame Anti-Shake Stopper for Headboards
Adjustable Bed Frame Anti-Shake Stopper for Headboards
Adjustable Bed Frame Anti-Shake Stopper for Headboards
Adjustable Bed Frame Anti-Shake Stopper for Headboards
Adjustable Bed Frame Anti-Shake Stopper for Headboards
New
1 / 6
About this itemAll characteristics
TypeHome Improvement > Furniture Hardware > Bed Frame Stoppers
Pieces1
MaterialMetal
Base plateBrass-gold, 2 mounting holes
Lock nutChrome hex nut
HeadMatte black knurled grip
Length: 2.5-4cm
From the seller

Sleep through a quiet night. This adjustable brass and chrome stopper braces your headboard against the wall so it stops knocking, rattling and drifting. Set it by hand in minutes, no drilling.

Read the full description

Description

Sleep through a quiet night. This adjustable brass and chrome stopper braces your headboard against the wall so it stops knocking, rattling and drifting. Set it by hand in minutes, no drilling.

Stops bed headboards and frames from shaking, rattling and loosening against the wall

Solves
  • bed frame rattling or shaking at night
  • headboard knocking against the wall
  • loosening furniture over time
  • noise disturbing sleep

Stop the headboard knocking for good

Tired of a bed that shakes, rattles and knocks the wall all night? Brace it against the wall and sleep through the quiet.

Set it once and let it stay put

Four stoppers at different extended lengths in a bedroom

Adjust to the exact gap

Turn the knurled head and the threaded rod extends by hand to fit the space between headboard and wall. Four length options let you match your gap without drilling or swapping the frame.

Close-up of knurled head, chrome hex nut and threaded rod

Locks the length in place

Once the rod meets the wall, snug the chrome hex nut by hand. It holds the extension so the stopper doesn't creep loose with nightly movement, which is where towels and cardboard fail.

Stopper braced between bed headboard and wall

Braces the headboard silently

The brass-gold base plate has two mounting holes and a flat face that spreads the load across the wall. Sideways knocking stops, and the whole thing hides behind the bed.

Brace your headboard in three steps

  1. 1
    Check the frame bolts

    Tighten any loose bolts first. A stopper stops sideways movement but can't fix loose joints.

  2. 2
    Extend the rod

    Place the base plate on the wall behind the headboard and turn the knurled head until the rod touches the headboard.

  3. 3
    Press and lock

    Press until snug, then tighten the chrome hex nut by hand. Light pressure only.

From thump to still

The knock that keeps you up

You roll over and the headboard hits the wall. Again. Folded towels and cardboard fill the gap for a few nights, then slip out. Bolts get tightened and loosen again. Meanwhile you or your partner lie awake waiting for the next thump.

A small part that closes the gap

Turn the knurled head until the rod meets the wall, press to snug, and lock the chrome hex nut. No tools, no drilling, a few minutes. The fit is set to your exact gap.

Quiet nights, every night

The bed stays where you put it. No knock, no rattle, nothing to listen for. Just a room that goes quiet when the light goes off.

Check the lock nut and it keeps working

  • Recheck the nut

    After the first few nights, snug the hex nut if it has backed off.

  • Keep the plate flat

    The base plate should sit flush against the wall.

  • Protect soft walls

    Use a felt pad or cloth behind the plate on paint or plaster.

  • Wipe the chrome

    A dry cloth removes fingerprints.

Extends to four heights for different gaps

ShortMediumLongExtra long
Adjustable length (cm)2.5-44.6-6.46.7-8.78.4-11

Measure the gap between headboard and wall before ordering.

Bed FramesPlatform Bed FramesUpholstered Beds

Characteristics

Main
TypeHome Improvement > Furniture Hardware > Bed Frame Stoppers
Length4 options
Details
Pieces1
MaterialMetal
Base plateBrass-gold, 2 mounting holes
Lock nutChrome hex nut
HeadMatte black knurled grip
Length ranges2.5-4, 4.6-6.4, 6.7-8.7, 8.4-11 cm

Reviews

Questions and answers

Will it fit my bed frame and the gap behind my headboard?
w
Wanelo · seller

It comes in four length ranges: 2.5-4 cm, 4.6-6.4 cm, 6.7-8.7 cm and 8.4-11 cm. Measure the gap between headboard and wall, then pick the range that covers it. The rod adjusts by hand for the final fit.

Will the base plate scratch or dent my wall or headboard?
w
Wanelo · seller

Extend until snug and no further. Overtightening is what dents things. On soft paint or plaster, put a felt pad or folded cloth between the plate and the wall to spread the pressure.

Can I use it in a rental without drilling?
w
Wanelo · seller

Yes. The base plate has two mounting holes, but you can skip them and simply brace the rod between headboard and wall, with a cloth pad behind the plate.

Is brass and chrome strong enough for nightly movement?
w
Wanelo · seller

The rod, hex nut and base plate are all metal, so there is no plastic part to flex or snap. It is a small part doing a simple job: holding a fixed gap.

How do I know when it needs re-tightening?
w
Wanelo · seller

Check it over the first few nights. If the headboard knocks again, the hex nut has probably backed off a little. Snug it and make sure the base plate sits flat.

Is it worth it compared with towels or cardboard?
w
Wanelo · seller

Folded cardboard slips out within days and has to be replaced. One metal stopper with a locking nut is a single purchase that keeps its length, so the cost per quiet night keeps falling.

Similar products

See all
Adjustable Bed Frame Anti-Shake Stopper for Headboards
$35.90