100W USB-C Fast Charging Cable with LED Wattage Display
Plug in and see the power you are actually getting. This 100W braided USB-C cable shows its live wattage on a cyan LED at the connector, so the charge you expected is the charge you get. Built with a nylon braid and reinforced strain relief for daily plugging and coiling.
Read the full descriptionDescription
Plug in and see the power you are actually getting. This 100W braided USB-C cable shows its live wattage on a cyan LED at the connector, so the charge you expected is the charge you get. Built with a nylon braid and reinforced strain relief for daily plugging and coiling.
100W USB-C fast charging with a live LED wattage display
- slow charging from underpowered cables
- not knowing the actual charging wattage
- fragile or tangling everyday cables
Fast charging you can see working
Tired of a cable that trickles power and leaves you guessing? This 100W braided USB-C cable shows its live charging wattage on the connector, so you know your device is getting the full charge.
See the wattage you're actually getting
- Watch the wattage light up
The cyan LED on the connector reads 100 PD W while the device charges. You see the power level in real time instead of trusting the label on the box. Plug in, glance at the connector, and you know whether the adapter and cable are working together.
- Built with a braided jacket
The nylon braid wraps the full cable, and each glossy black connector has reinforced strain relief where the jacket meets the housing. That is the spot where cheap cables split first. Daily plugging, coiling in a bag and pulling it off the desk all put stress there, and this build is made to take it.
- Rated for 100W, matched to 66W
This is a 100W USB-C Power Delivery cable, compatible with 66W fast charging devices, with a 1.2m length that reaches a desk outlet or a bedside adapter. Your actual speed depends on the adapter and device, so pair it with a PD charger that matches your phone or laptop. Looking for a second charger for the car? Browse car chargers.
Plug in and check the display
- 1Connect the adapter
Plug one end into a USB-C PD wall adapter or power strip, and the other end into your phone, tablet or laptop.
- 2Read the connector
Look at the LED on the connector while the device charges. It shows the live wattage, such as 100 PD W on a 100W setup.
- 3Unplug by the connector
Hold the glossy housing when you pull the cable out. Pulling on the braid stresses the strain relief over time.
Characteristics
Reviews
Questions and answers
The cable is rated for 100W USB-C Power Delivery. Real charging speed is set by the lowest link in the chain, so the adapter and the device matter as much as the cable. A 66W phone will charge at up to 66W on this cable, and a laptop that accepts 100W will run at full rate on a 100W PD adapter. The LED on the connector shows the wattage actually flowing.
It is a live readout. During charging on a USB-C PD adapter, the connector shows the power level the cable is delivering, for example 100 PD W. If the number is lower than you expect, check the adapter or the device before you blame the cable.
A cable that cannot carry PD current caps your charging speed every day you plug in. This one has a braided nylon jacket, reinforced strain relief at both connectors and a visible power readout, so you get a cable you can trust and check. Fewer replacements over a couple of years and no guessing about speed is the value here.
Yes for most desks and nightstands. 1.2m reaches from a wall or power strip outlet to a laptop on the desk, or from an adapter on the nightstand to a phone in bed. If your outlet sits behind a sofa or across the room, a longer cable will fit better.
Yes. It is a USB-C to USB-C cable, so it works with phones, tablets and laptops that use USB-C Power Delivery. Pair it with a PD adapter rated high enough for the laptop to get full speed.
Similar products
See all




