Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs

Questions and answers
+3
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
New
1 / 10
About this itemAll characteristics
TypeConsumer Electronics > Audio > Wireless Microphones
Wireless range50m
Transmitter battery400mAh
Clip-on transmitters2
Receiver connectorUSB-C
Charging case displayDigital LED battery readout
Color: Type C
From the seller

Clear voice from your phone without a cable in the frame. Plug the USB-C receiver into your phone or camera, clip a transmitter to your collar, and record speech that sounds as sharp as your picture. Two mics and a charging case with LED battery display keep the kit ready for every shoot.

Read the full description

Description

Clear voice from your phone without a cable in the frame. Plug the USB-C receiver into your phone or camera, clip a transmitter to your collar, and record speech that sounds as sharp as your picture. Two mics and a charging case with LED battery display keep the kit ready for every shoot.

Wireless lapel mic that plugs straight into your USB-C phone for clean, cable-free voice recording

Solves
  • muffled audio from built-in phone mics
  • tangled cables on camera rigs
  • charging and keeping track of battery life
  • background noise during vlogs

Clear voice, straight from your phone.

Stop losing good footage to muffled audio. Clip on a wireless mic, plug the receiver into your USB-C port, and record voice that sounds as sharp as the picture.

One plug, no adapters, no cable in the frame

Receiver plugged straight into a phone's USB-C port on a desk

Plugs straight into USB-C

The receiver goes directly into a USB-C phone or camera, so there is no dongle to lose and no loose joint to cut out mid-take. It is the same plug you already use for charging. If you want a broader guide to clip-on options, the range covers more setups.

Two clip-on transmitters and charging case in grey and yellow

Two mics, one case

Each transmitter has a magnetic back and a dedicated slot in the charging case. Run two people on one camera for an interview, or keep a spare mic clipped for a second take. Both transmitters live in the case between shoots, so they are never hunted down at the last minute.

Phone on a stand with the wireless mic kit ready to record

Battery you can read

The charging case has a digital LED battery display, so you see charge status at a glance. Check it before a shoot and you will never discover a flat transmitter halfway through a walk-and-talk. The 400mAh battery in each transmitter is the number to keep an eye on.

Get clean audio in four steps

  1. 1
    Plug in the receiver

    Connect the USB-C receiver straight into your phone or camera. No adapter is needed.

  2. 2
    Power on a transmitter

    Press the yellow power button on the transmitter until it is on, then check the LED on the case for charge level.

  3. 3
    Clip it to your collar

    Attach the transmitter to a flat part of your shirt or jacket with the magnetic back, close to your chin.

  4. 4
    Record a 10-second test

    Play it back with headphones and adjust the clip position if the voice sounds muffled or rubs on fabric.

Two mics, one receiver, one charging case

  • Charging case×1

    Stores and charges both transmitters, with LED battery display

  • Clip-on wireless transmitters×2

    Magnetic back and metal mesh grille

  • USB-C receiver×1

    Plugs straight into phones and cameras

Your voice deserves the same clarity as your picture

Your footage deserves better audio

You hit play on the edit and hear your own voice echoing off the walls. The built-in phone mic grabs everything at once, so traffic and wind end up louder than you. Most creators end up re-recording the same lines or cutting the clip short. That is wasted time on footage that looked great.

One plug, one clip, clear voice

The receiver slides into your USB-C port with no adapter in between. Clip a transmitter to your collar and the mic sits close to your mouth, so your voice comes through full and even. Wired lavs tangle with the phone and pull at your shirt. This setup leaves your hands free and keeps the cable out of the frame, with 50m of wireless range for walking, pacing or moving around a room.

Ready when the camera rolls

Glance at the LED on the charging case before you leave the house. Both transmitters sit in their own slots, charged and waiting. Hit record, clip on, and talk. Your voice lands close and clean, and the playback sounds like the footage you shot, not a compromise you have to apologise for.

Why built-in phone audio falls short

This kitBuilt-in phone micWired lav
Mic sits close to the mouth —
Needs no adapter on USB-C phones —
Cable runs across the frame——
Noise cancellation ——
Two mics in one kit ——
Wireless Chargers & Qi Wireless Charging PadsWireless Earbud Charging Case & Protective CasesKids Headphones & Noise Reduction HeadphonesNovelty Charging CablesMobile Gaming AdaptersOver-Ear HeadphonesTWS EarbudsSATA to USB Adapter Cables and USB

Characteristics

Main
TypeConsumer Electronics > Audio > Wireless Microphones
Color2 options
Details
Wireless range50m
Transmitter battery400mAh
Clip-on transmitters2
Receiver connectorUSB-C
Charging case displayDigital LED battery readout
Noise cancellationYes
Body finishMatte charcoal with glossy black transmitter face and yellow interior

Reviews

Questions and answers

Does the USB-C receiver work with my iPhone or USB-C camera without an adapter?
w
Wanelo · seller

Yes. The receiver plugs directly into a USB-C port on a phone or camera, so no dongle or extra cable is needed. Plug it in, clip on a transmitter, and run a 10-second test recording to confirm the signal before you shoot.

How long does the 400mAh battery last, and how do I check the level?
w
Wanelo · seller

Each transmitter carries a 400mAh battery. The charging case has a digital LED display that shows battery level, so you can check both mics before leaving the house. Recharge the transmitters in their slots after each session so they start every shoot full.

Does the 50m range hold up with walls or in a busy room?
w
Wanelo · seller

The kit is rated for 50m of wireless range in open conditions. Walls and dense crowds reduce that distance, so keep the receiver and phone in the same room as the transmitter for the cleanest signal, and test your spot before a long take.

How is this different from a built-in phone mic or a wired lav?
w
Wanelo · seller

A built-in mic picks up the whole room, including traffic and wind. A wired lav ties you to the phone with a cable that tugs at your shirt. This kit puts a mic on your collar and sends the voice over wireless, with noise cancellation on for busy streets and cafes.

Can I use both transmitters at once for an interview?
w
Wanelo · seller

Yes. Clip one transmitter on each person and both voices are captured on the same receiver. A short test with both mics running lets you check levels before you roll.

How do I charge the transmitters and the case?
w
Wanelo · seller

Seat each transmitter in its dedicated slot in the charging case, and the case charges them. Keep the case topped up between shoots so both mics and the case are ready when you are. Check the LED display first to see where each one stands.

Similar products

See all
Wireless Lapel Mic for USB-C Phones: Clear Voice Vlogs
$64.90