USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD

Questions and answers
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
New
1 / 6
About this itemAll characteristics
TypeComputer Storage Accessories > Cables & Adapters
From the seller

Your old 2.5-inch drive becomes a plug-and-play USB 3.0 drive in seconds. One cable connects a bare SATA SSD or HDD to your PC or laptop, with no enclosure and no tools. LED lights show power and drive access while you work.

Read the full description

Description

Your old 2.5-inch drive becomes a plug-and-play USB 3.0 drive in seconds. One cable connects a bare SATA SSD or HDD to your PC or laptop, with no enclosure and no tools. LED lights show power and drive access while you work.

Plug-and-play USB 3.0 access to 2.5-inch SATA HDDs and SSDs with no tools needed

Solves
  • Drive needs an enclosure or internal install to connect
  • Accessing or cloning an old laptop hard drive
  • Need for a fast USB 3.0 connection to a 2.5-inch SATA drive

Reach your old laptop drive in seconds

Stop digging for an enclosure or opening your laptop just to reach one old drive. Plug the SATA drive straight into USB 3.0 and your files are ready to back up, clone, or recover.

One cable between your drive and your desk

Adapter cable connecting a 2.5 inch drive to a laptop on a desk

No enclosure, no screws

The 22-pin SATA III connector seats straight onto a bare 2.5-inch drive, so there is no housing to buy, no screws to find and no case to open. The drive sits on the desk where you can see it and reach it.

Cable with dimension callouts for the USB plug and SATA connector

USB 3.0 SuperSpeed plug

The USB 3.0 SuperSpeed plug links the drive to your computer at USB 3.0 speed, which matters when you are copying large folders or running a full clone. Plug it into any USB 3.0 port on your PC or laptop.

Infographic of SATA and SSD support with LED lights and plug-and-play

LED lights that show status

The SATA Access Power LEDs show when the drive has power and when it is being read or written. Wait for the light to settle before you unplug, and you will not cut a copy off halfway through.

Connect a drive in three steps

  1. 1
    Seat the SATA end

    Line up the 22-pin SATA III connector with the bare 2.5-inch drive and press it in gently until it sits flat.

  2. 2
    Plug USB into your PC

    Connect the USB 3.0 plug to a USB 3.0 port on your computer. Use a blue or SS-marked port for the fastest link.

  3. 3
    Check the LED

    Wait for the SATA Access Power LED to light and settle. When the drive shows up in File Explorer, you can start copying or cloning.

Compact enough for a crowded desk

  • 130 mmCable length
  • 48 x 45 mmSATA connector
  • 52 x 15 mmUSB plug

Short enough to keep the drive beside your laptop without tangling

harddisk idedata transfer cabledocking external hard drivem.2 ssd enclosureshard disk idesata to usbsata to usb porthard drive casescable organizers wirenintendo switch lite case

Characteristics

Main
TypeComputer Storage Accessories > Cables & Adapters
Details

Reviews

Questions and answers

Will it work with my specific drive, SSD or HDD, 7mm or 9.5mm?
w
Wanelo · seller

It fits standard 2.5-inch SATA drives, both SSDs and HDDs, with the 22-pin SATA connector. The cable does not care about thickness, since it connects to the drive's connector instead of wrapping around the case. Check that your drive uses a 22-pin SATA interface, which covers the common laptop and desktop 2.5-inch models.

Is USB 3.0 fast enough for cloning or big backups?
w
Wanelo · seller

For most desk jobs, yes. The SuperSpeed USB 3.0 link is far faster than USB 2.0, so a large backup or a full drive clone finishes in a reasonable session instead of an overnight wait. Your drive's own speed still sets the limit, so an older mechanical HDD will run slower than a modern SSD.

Is it safe to connect a bare drive to my PC without an enclosure?
w
Wanelo · seller

Yes, as long as you handle it the way you would any exposed drive. Line the connector up straight, press it in gently, and set the drive on a flat surface close to the computer. Keep an eye on the LED and wait for it to settle before you unplug.

Why buy this instead of a USB enclosure?
w
Wanelo · seller

An enclosure adds a housing, screws and a case for a drive you may only connect a few times a year. This cable costs less than most enclosures and sits in a drawer when you are done. You skip the setup, and the drive stays easy to swap between machines.

Do I need drivers or software to use it?
w
Wanelo · seller

No. The cable is plug and play, so the drive appears in File Explorer or Disk Management once it has power and the USB end is connected. You can then copy files or run your cloning software as usual.

Similar products

See all
USB 3.0 SATA to USB Adapter for 2.5-Inch SSD and HDD
$49.90