USB 3.0 to 2.5-inch SATA Adapter Cable with UASP Speed

One cable, both port types, no enclosure

• Direct SATA to USB bridge

  The SATA connector seats on a bare 2.5-inch HDD or SSD and the USB 3.0 plug runs into your laptop or desktop. There is no enclosure to buy, no tray to fit and no case to open. The cable is about 20 cm long, so the drive sits right beside the machine.

• UASP speed built in

  UASP support is the reason this cable moves files faster than a standard USB 3.0 bridge. Your real numbers depend on the drive and the port, so test with a large folder the first time.

• USB-A and USB-C in one set

  The detachable USB-C adapter lets the same cable plug into a modern USB-C laptop. Keep the USB-A plug for older desktops and remove the adapter when you need it. One set covers both port types, so you do not need a second cable for a new machine.

The figures on the box

• 20 cmApprox. cable length
• 70%Faster reads, UASP claim
• 40%Faster writes, UASP claim

Connect, power, copy, unplug

1. 1
   Seat the drive

   Slide the SATA connector onto the bare 2.5-inch drive so the contacts line up fully.

2. 2
   Plug in the USB end

   Use a USB 3.0 port on the computer. Switch to the USB-C adapter if your port is USB-C.

3. 3
   Wait for the lights

   The SATA power and access LEDs light up, and the drive appears in your file manager. No driver install is needed.

4. 4
   Copy, then eject

   Drag the folders across, eject the drive in your operating system, and wait for the access light to go off before you unplug.

From a drawer of dead drives to a working backup

The drawer full of old drives

The drive from the old laptop is still in the drawer. The family photos, tax files and school projects on it are the only copies you have, and each week it stays unread the backup slips further away. Opening a desktop case or buying a clunky enclosure feels like too much work for one folder.

A cable instead of a screwdriver

The SATA end seats on the bare 2.5-inch drive and the USB-A plug goes into your computer. A 20 cm cable keeps the drive close to the machine, and the SATA power and access lights confirm the link is live. Nothing needs to come apart.

Files copied and backed up

Folders copy across at UASP speed while you keep working at the desk. When the transfer finishes, you eject the drive, wait for the access light to go off and put it back on the shelf as a backup you can read any time.

Faster than standard USB 3.0, simpler than an enclosure