USB 2.0 Printer Cable Type A to B, Shielded & Flexible

Flexible where a stiff cable fights you

• Bends without fighting you

  The matte PVC jacket stays soft and bends without deformation. The cable lies flat behind the desk instead of kinking at the connector, and it keeps its shape after days of being pushed into a tight corner.

• Keeps the data steady

  Double shielding and a magnetic ferrite ring near the printer end work together against interference. Jobs arrive complete, with no missing lines halfway down the page.

• Copper core for clear transfer

  A multi-strand copper core and a large transmission channel carry full files to the printer. Text stays sharp and colour stays true on every page.

Connect it in three steps

1. 1
   Plug the Type-B end into the printer

   Seat the square end firmly in the printer's USB-B port until it clicks or sits flush.

2. 2
   Plug the Type-A end into your computer

   Use any free USB-A port on your laptop or PC. Route the cable in a loose curve toward the back of the desk.

3. 3
   Print a test page

   Send a test page from your printer settings. If the output is complete and clear, the connection is working.

Simple care for a longer cable life

• Grip the connector

  Pull on the plastic housing when unplugging, never on the cable itself.

• Keep wide curves

  Avoid sharp folds at either connector so the shielding stays intact.

• Keep tension off

  Leave a little slack between the desk and the printer so the connector is not pulled while the printer runs.