TWS Bluetooth Earbuds with Battery Display & Tap Control
The earbuds you grab for the commute should not be a guessing game. These glossy white TWS earbuds show the battery level for each earbud and the case on your phone, so you know what you have before you leave. Pair in a few taps on iPhone or Android and control playback right on the...
Read the full descriptionDescription
The earbuds you grab for the commute should not be a guessing game. These glossy white TWS earbuds show the battery level for each earbud and the case on your phone, so you know what you have before you leave. Pair in a few taps on iPhone or Android and control playback right on the earbud body.
Real battery capacity shown per earbud and case, with easy tap control
- unsure how much battery is left
- tricky pairing with phone
- touch controls that miss inputs
Know Your Charge Before You Leave the House
Stop guessing whether your earbuds will last the commute. See real battery levels for each earbud and the case, then tap and go.
Built around the one number you check

Battery you can actually see
Your phone shows a separate charge level for each earbud and one for the case. You see the weaker earbud before it cuts out mid-call, not after. Most budget pairs give you a vague light or nothing at all.

Tap control that responds
The tap surface covers the whole outer earbud body, so you are not hunting for a small spot with cold fingers. Answer a call or pause a track without reaching for the phone. A firm, single tap registers most reliably.

Pairs in seconds
Hold the pairing button on the case back, switch on Bluetooth, and pick the earbuds from the list. The same routine works on iPhone and Android. Keep both earbuds out of the case during setup so they show up in the list.
Three charge levels, always visible
- 3Charge levels on screen: each earbud and the case
- 2Wireless earbuds in the set
- 100%Full charge shown in the phone battery popup
- 1Rechargeable charging case
Connect to iPhone or Android in three steps
- 1Take both earbuds out
Lift the earbuds out of the charging case so they are ready to pair.
- 2Hold the case button
On iPhone, press and hold the button on the back of the case. On Android, open the lid and hold the button for 4 seconds.
- 3Pick them from your list
Turn on Bluetooth on your phone and select the earbuds from the device list. The battery popup appears once they connect.
Earbuds and charging case, nothing extra
- Wireless earbuds×2
Glossy white with tap control on the outer body
- Charging case×1
Rechargeable, with a pairing button on the back
Dead earbuds mid-song, every time
The dead-earbud moment
The train pulls in, you reach for your earbuds, and the left one has already gone quiet. There is no warning and no readout, just a song cut off halfway down the platform. Cheap pairs leave you guessing every morning and hoping the case has enough left for the ride.
Seeing the charge
Open the phone and the popup lists each earbud and the case as a real percentage. The readout in our product photos reads 100%, 100% and 52%, so you spot the weaker earbud before you walk out the door.
Ready to go
A tap on the outer body starts playback or answers a call. The pairing button on the case back handles reconnecting. You leave knowing your charge, and your pockets stay empty.
Why this, not a no-name pair
| This | No-name budget earbuds | |
|---|---|---|
| Battery shown per earbud and case | — | |
| Tap control on the whole earbud body | Partial | |
| Pairing button on the case back | Partial | |
| AirPods-style case design | Partial | |
| Works with iPhone and Android |
Characteristics
Reviews
Questions and answers
They are sold as i60 TWS earbuds, a budget pair with an AirPods-style case. The part that sets them apart is the phone readout: each earbud and the case show a charge level after pairing. If a famous brand name matters more to you than that readout, a name-brand pair is the better buy.
Yes. Turn on Bluetooth and pick the earbuds from the list on either phone. On iPhone you press and hold the button on the back of the case. On Android you open the lid and hold the button for 4 seconds.
Pair them once, then open the battery popup on your phone while the earbuds are connected. It shows the level for each earbud and the case, so you can check before you leave.
Tap control covers the whole outer earbud body. Use a firm, single tap and wait a second before the next one, since a light tap can be missed. A tap answers a call or starts and pauses playback.
They are built for the commute, the gym, calls and music on the go. Expect everyday sound rather than studio detail. The value is in the readout, the tap controls and a compact case that fits a pocket.
A no-name pair costs little, but it leaves you guessing about charge, and a dead earbud on the train costs you the rest of the ride. The readout is the part most budget pairs skip, and it is the part you check every day.
Similar products
See all





