Sublimation Coating Spray for Cotton — Vibrant, Quick-Dry

Three reasons it delivers where others fade

Instant‑Dry Formula

No more waiting between coats. The fine mist flash‑dries in under 60 seconds, so you can spray and press without breaking your workflow. Perfect for high‑volume days.

All‑in‑One Cotton & Polyester

Works equally well on cotton and polyester — no need to stock separate coatings. The same bottle readies sweatshirts, tote bags, pillow cases, and canvas for crisp sublimation.

SGS‑Tested & Eco‑Friendly

Every batch is independently lab‑tested to be 100% harmless on skin‑contact garments. Water‑based, low‑VOC, and fully biodegradable — safe for you, your customers, and the planet.

Numbers that back up the brilliance

• Under 1 minFlash‑dries before press
• 2Cotton & Polyester ready
• SGSThird‑party eco‑safety
• 30ml~60 standard shirts

From bottle to press in 5 minutes

1. 1
   Shake & prep

   Give the bottle a 10‑second shake. Lay your garment flat on a protected surface. Ensure the fabric is clean and lint‑free.

2. 2
   Spray evenly

   Hold the nozzle 15–20 cm away and apply a fine, uniform mist over the entire print area. One light coat is enough — don’t oversaturate.

3. 3
   Let it flash‑dry

   Wait 45–60 seconds until the coating feels dry to the touch. You’ll see a slight sheen; that’s the receptive layer forming.

4. 4
   Position your transfer

   Place the sublimation paper face‑down onto the coated area. Secure with heat‑tape if needed to prevent shifting during the press.

5. 5
   Heat press

   Press at the manufacturer’s recommended temperature and time (typically 190–200°C for 45–60 seconds). Use medium pressure and a protective sheet.

6. 6
   Peel & reveal

   Carefully lift the paper while still warm to reveal a vibrant, glossy design. Allow the garment to cool completely before handling.

From muted prints to gallery‑grade vibrancy

The struggle of cotton sublimation

Standard sublimation inks simply refuse cotton — colours bleed, transfers crack, and the final print looks muted no matter how long you press. Even polyester blends demand endless trial and error, wasting both materials and creativity.

The all‑in‑one coating that changes everything

Our advanced formula bonds directly to cotton and polyester fibres, creating a transparent, high‑receptive underlayer. Just spray evenly, let it flash‑dry in under a minute, and it’s ready to accept any dye‑sublimation transfer — no primers, no pre‑treatments, no compromises.

The result: wear‑resistant, head‑turning designs

Once heat‑pressed, the coating locks in pigments with a gloss that stays bright wash after wash. What you’re left with is a soft‑to‑the‑touch finish that feels like factory‑grade printing — so good your clients will think it came straight from a pro shop.

Why this one wins