Renault Smart Card Key Fob Shell — 3‑Button Replacement

Three details that make the difference

• Snap‑together OEM design

  The two‑piece shell clicks shut with the same precision as the original. Internal posts hold the circuit board steady; no rattles, no gaps.

• Emergency key blade included

  A fresh uncut metal blade slides into the card’s edge. Get it cut to your mechanical lock so you’re never locked out when the battery dies.

• Textured matte finish

  The fine grain on the surface resists fingerprints and gives a sure grip — it looks sharp and feels substantial every time you pull it from your pocket.

Quick facts for a straightforward fix

• 5+compatible Renault models
• 2shell pieces, snap‑together
• 0tools required for swap
• 1uncut metal emergency blade

Swap your shell in 5 minutes

1. 1
   Pry open your old key card

   Insert a small flathead screwdriver or a fingernail into the seam and gently twist until the two halves separate.

2. 2
   Lift out the circuit board and battery

   The board sits in place with light friction. Note the battery orientation before removing it.

3. 3
   Place the board into the new shell

   Align the button pads with the new shell’s rubber contacts. Press the board down until it clicks into the retaining posts.

4. 4
   Snap the halves together

   Line up the front and back, then press firmly around all edges until the shell clicks shut. Test all three buttons before reinstalling the key blade.

Everything you need

• Smart card shell×1

  Two‑piece snap‑together housing

• Emergency key blade×1

  Uncut brass, black plastic grip

From brittle plastic to solid confidence

Why this shell beats the dealer