RC Battery Tester for LiPo, NiMH & Li-Ion Packs
Read voltage, charge percentage and chemistry on one LCD before every run. Works with LiPo, LiFe, Li-Ion, NiMH and NiCd packs from 1 to 7 cells.
Read the full descriptionDescription
Read voltage, charge percentage and chemistry on one LCD before every run. Works with LiPo, LiFe, Li-Ion, NiMH and NiCd packs from 1 to 7 cells.
One compact meter tells you the voltage, charge percentage and chemistry of RC LiPo, LiFe, Li-Ion, NiMH and NiCd packs
- Not knowing how charged an RC battery pack is
- Confusing battery chemistries and cell counts
- Needing a multimeter and manual calculation to check packs
Know exactly how charged your RC pack really is
Stop guessing from the bag. Read voltage, percentage and chemistry in seconds, then run with confidence.
Voltage, charge and chemistry on one screen
One screen, every reading
The LCD shows voltage, charge percentage and battery status bars at once. In the product photo it reads 11.57 V and 50% on a connected LiPo pack.
Pick your chemistry
TYPE selects LiPo, LiFe, Li-Ion, NiMH or NiCd so the percentage matches the pack in your hand. The labels are printed on the side for quick reference.
Built for 1 to 7 cells
CELL sets the cell count. The balance socket takes a 1 to 7 cell lead connector, so one meter covers your small and large packs.
Three button presses from bag to reading
- 1Plug in the balance lead
Connect the pack's balance lead to the 1 to 7 cell socket.
- 2Set TYPE and CELL
Press TYPE to pick the chemistry, then CELL to match the cell count.
- 3Read the LCD
Check voltage, percentage and status bars. Press MODE to switch the display.
From guessing to knowing
The pack that looked full
You pull a pack from the bag and have no idea whether it is full, half or nearly flat. A multimeter and some cell math can answer it, but nobody wants to do that at the field. So you guess, and the pack dies mid-run.
One meter, every reading
Plug the balance lead in, pick the chemistry with TYPE and the cell count with CELL. The LCD shows voltage, percentage and status bars. No calculation, no guessing, and every pack leaves the bench checked.
Faster than a multimeter and manual math
| RC Battery Tester | Multimeter | |
|---|---|---|
| Shows voltage | ||
| Shows charge percentage | — | |
| Chemistry selection | — | |
| Cell math done for you | — | |
| Pocket-sized for the field | Partial |
Characteristics
Reviews
Questions and answers
Yes. The balance socket takes a 1 to 7 cell lead connector and the CELL button sets the count.
You choose the chemistry with the TYPE button: LiPo, LiFe, Li-Ion, NiMH or NiCd. The meter then matches the percentage to that type.
A multimeter gives raw voltage and leaves the cell math to you. This meter shows voltage, percentage and status bars together, so it is quicker for checking a bag of packs. It is a small, one-time purchase that saves time at every session.
The product photo shows it reading the same voltage as a multimeter on the same pack. Use it for quick pre-run checks, and keep your charger for full balancing.
Yes. Both are selectable with the TYPE button, which suits receiver and car packs.
Similar products
See all
RC Battery Tester for LiPo, NiMH & Li-Ion Packs