PS5 Dual Controller Charging Dock with LED Status Lights
Set two PS5 controllers on this dock and they charge together, sitting on contact pins beside the console. The LED shows red while charging and blue when a pad is full, so you start every session knowing which pad is ready.
Read the full descriptionDescription
Set two PS5 controllers on this dock and they charge together, sitting on contact pins beside the console. The LED shows red while charging and blue when a pad is full, so you start every session knowing which pad is ready.
Charge two PS5 controllers at once with a dock that shows charging status
- Controllers running out of battery mid-game
- Cable clutter around the console
- Not knowing when a controller is fully charged
Two controllers charged overnight, ready for every session
Before: a dead pad mid-match and a tangle of cables by the console. After: both controllers sit charged on a compact dock, with an LED that tells you when they're full.
Two Controllers, One Compact Dock
- Both pads charge at once
Two slots hold two PS5 controllers at the same time. Each pad rests on contact pins, so there is no second cable to hunt for. Set them down after a session and both start charging from one dock.
- Know when they're full
The indicator glows red while a controller charges and switches to blue once it is full. You read the status from the couch, so you never pick up a pad just to check it.
- Tidy setup, no cable pile
The dock is compact matte black plastic that sits beside the console without taking over the shelf. One cable runs in, and the controllers stay in one place instead of spread across the floor and the couch.
Drop In, Plug In, Done
- 1Seat the first pad
Set one controller onto its slot so the contact pins meet the bottom of the pad.
- 2Seat the second pad
Repeat on the second slot. Both slots take a pad at the same time.
- 3Plug in the cable
Connect the USB-A to USB-C cable and power it from a USB source rated for 5V 2A input.
- 4Read the LED
Red means charging. Blue means full. Leave the pads overnight, or until the light turns blue.
Everything You Need to Start
- Charging dock×1
Two controller slots with contact pins and an LED status indicator.
- USB charging cable×1
USB-A to USB-C, for a USB source rated 5V 2A input.
Less hunting, more playing

The dead pad at the worst moment
You are five minutes into a co-op run and the controller in your hands cuts out. The lobby keeps moving. Your friend waits while you dig through a drawer for a cable, and the second pad is flat too. A single cable only charges one pad at a time, and nothing tells you which pad is ready.
Ready pads, every session
Both controllers sit on the dock beside the console, resting on their contact pins. The indicator glows red while they charge and turns blue once a pad is full. No cable tangle, no guessing, and the console ports stay free for everything else.
Characteristics
Reviews
Questions and answers
The dock is built for PS5 wireless controllers, the DualSense pads that ship with the console. Seat the pad on its slot and check that the LED lights up. A lit indicator means the contact pins are making a connection.
The dock is compact and sits comfortably next to a console on a shelf, desk or TV stand. If your spot is tight, measure it before you order.
Overnight charging is the routine the dock is made for. The LED turns blue when a pad is full, so you can check in the morning without picking up each controller. Keep the dock on a flat, stable surface so both pads stay seated.
One cable charges one pad at a time and gives you no status feedback. This dock charges two controllers at once and shows each seat's status. If you own two pads and play together, you save the cable swapping and the battery checks every single session.
The box holds the charging dock and a USB-A to USB-C charging cable. Power comes from a USB source rated 5V 2A input, and the dock delivers 1A output.
Similar products
See all




