Plug-and-Play Retro TV Game Console 64GB, 10,000 Games

Two Wireless Pads, Zero Cords

• Two Wireless Controllers

  Both pads connect through one USB receiver, so the second player never waits for a turn or stretches a cord across the room. The controllers use a PS-style layout with SELECT, START and MODE buttons, and each one has a battery compartment on the back.

• A 64GB Card Preloaded

  The included 64GB memory card is advertised with 10,000 games and 20+ emulated systems. Insert the card, open the menu, and move between retro platforms from one screen instead of hunting for separate discs or cartridges.

• Plugs Into Your TV

  HDMI output runs at 1280x720 on any TV with a free HDMI port, and an HD extension cord comes in the box for tight spots behind the set. The picture is 720p. The 4K label sits on the emulator stick.

The numbers on the box

• 64GBPreloaded memory card
• 10000Advertised game library
• 720pHDMI output resolution

Plugged In and Playing in Minutes

1. 1
   Plug the HDMI into the TV

   Connect the console to a free HDMI port on your TV. Use the HD extension cord if the port sits behind the set or against a wall.

2. 2
   Insert the USB receiver

   Seat the card reader dongle in a USB port and slide the 64GB card into its TF slot.

3. 3
   Power on and set the input

   Connect the power cable, power the console, then switch the TV to the matching HDMI input.

4. 4
   Install batteries in both controllers

   Each controller has a built-in battery compartment on the back. Fill both before you pair.

5. 5
   Pick a game and pass the pad

   Browse the library by emulator, choose a game, and hand the second controller to a friend.

Everything You Need to Start Tonight

• Game controller×2

  Matte white pads with black grips and a PS-style layout

• Card reader (USB dongle)×1

  Wireless 2.4G receiver with a TF card slot

• Memory card 64GB×1

  Preloaded library, advertised at 10,000 games

• Power cable×1

  Powers the console

• HD extension cord×1

  Adds reach between the console and the TV

• Manual×1

  Setup guide for first use

One Plug, Whole Room Playing

The Cord Problem

Game night usually dies the same way. One wired pad gets passed around the couch, the cord snags on a coffee table leg, and somebody gives up before the first round. Everyone wants a turn, and nobody wants to untangle the controller again.

One Box, Whole Room

The U9 plugs into an HDMI port on your TV and pairs through a 2.4G USB receiver. Two wireless controllers connect to it, so players can sit anywhere on the couch. No cords run across the rug, and one menu handles every game.

Start Tonight

Load the 64GB card and the library is ready on screen, advertised at 10,000 games across 20+ emulated systems. Pick a classic, hand over the second pad, and the first round starts before the snacks run out.

From Unboxing to Game Night

1. First use
   Plugged in and playing

   Connect HDMI, insert the receiver, power on and pair the controllers. Most setups reach the game menu in a few minutes once the TV input is set.

2. 3 uses
   Menu feels familiar

   Navigating the library and switching games gets quick. Players learn which emulators they like best.

3. 30 days
   Regular game-night staple

   The console becomes the default for weekend games. Controller grips and battery life are the things to watch.