Paper Towel Holder One-Hand Tear, Matte Black Steel
Tear a sheet with one hand while the roll stays on the rod. The matte black rack mounts under a cabinet or on a wall, so the counter stays clear while you cook and clean.
Read the full descriptionDescription
Tear a sheet with one hand while the roll stays on the rod. The matte black rack mounts under a cabinet or on a wall, so the counter stays clear while you cook and clean.
Holds a full paper towel roll and dispenses one-handed without unrolling
- paper towel roll unspooling on the counter
- cluttered countertops
- tearing paper with one hand
- drilling-averse renters needing nail-free mounting
Tear one sheet. Keep the roll in place.
Stop wrestling a roll that unspools across the counter. Tear with one hand while the rack holds the full roll steady, under a cabinet or on the wall.
A roll that stays where you put it
- Tension wires that hold the roll
The pull-to-dispense wires press on the roll as it turns, so it stays where it is while you tear. Turn the roll with one hand, pull down the sheet you need, and it does not spin off the rod or drag across the counter.
- Mount it your way
Use the perforated plate with screws and anchors for a permanent install. Or use the nail-free adhesive plate on wood, glass, metal, or marble. Renters get the same rack without a drill.
Rotate, pull, tear with one hand
- 1Load the roll
Slide the full roll onto the rotating rod so it sits between the tension wires.
- 2Rotate, then pull
Turn the roll gently with one hand and pull down the sheet you need.
- 3Tear against the perforation
Tear along the perforation. The roll stays on the spindle ready for the next sheet.
Everything for both mounting options
- Matte black paper towel rack×1
Rotating rod with pull-to-dispense tension wires and a rounded end cap.
- Mounting screws and anchors
For the perforated mounting plate on wall or cabinet surfaces.
- Nail-free adhesive plate×1
For wood, glass, metal, or marble surfaces without drilling.
Characteristics
Reviews
Questions and answers
Yes. The rod takes a full roll and the tension wires keep it in place as the paper comes off. If you buy jumbo rolls, check the core size against the rod before you mount it.
The adhesive plate works on wood, glass, metal, and marble without any drilling. Clean the surface, let it dry completely, then press the plate firmly for several seconds before you hang the rack.
Both. Mount it horizontally under an upper cabinet, or perpendicular to a wall. The same rack works in either position, so you can match it to your layout.
The screw method leaves small holes, so mark them with a level and pilot drill first. The nail-free plate leaves no holes, but test a small patch of paint first if the wall is freshly painted.
A freestanding holder slides and tips on a crowded counter, and the roll still spins when you pull. This rack is a single purchase that keeps the roll off the counter for good, so there is no recurring cost to replace it.