Oculus Quest 2 Link Cable 5M USB 3.0 for Fast VR Play
Tethered VR gets easier when the cable stops pulling at your headset. This 5M USB 3.0 link cable gives you room to move, a right-angle plug that sits flat, and a clip for the slack. It is built for Oculus Quest 2 owners who play Link on a PC.
Read the full descriptionDescription
Tethered VR gets easier when the cable stops pulling at your headset. This 5M USB 3.0 link cable gives you room to move, a right-angle plug that sits flat, and a clip for the slack. It is built for Oculus Quest 2 owners who play Link on a PC.
5M high-speed USB 3.0 link cable for Oculus Quest 2 VR, up to 5Gbps
- Slow or laggy data transfer for VR Link
- Unstable charging current
- Cable tangling and clutter during VR play
Roam your play space without the tangle
Tethered PC VR usually means a short cable, a tugging headset and a desk you keep bumping. This 5M USB 3.0 link cable gives you the reach and a clean run so you can focus on the game.
What's inside the cable that matters

Steady data, shielded core
A tinned copper core runs inside mesh shielding and a PVC jacket. That construction keeps the data path clean while you move, and the rated USB 3.0 spec goes up to 5Gbps.

Right-angle headset plug
The right-angle USB-C end sits flat against the headset port instead of pushing outward. A built-in smart chip holds a stable current, and gold-plated contacts keep the join clean after repeated plugging.

Reach you can actually use
Five metres lets you stand, turn and step back without the headset pulling against the PC. Clip the slack along a desk edge or wall with the included clip, and cable organizers keep a longer run neat.
Set up the link in five steps
- 1Plug the Type-A end into a USB 3.0 port
Use a rear or dedicated USB 3.0 port on the PC, not an unpowered hub. USB 3.0 ports are usually blue inside.
- 2Plug the USB-C end into the headset
Seat the right-angle plug in the headset port so it lies flat without pressing against the housing.
- 3Walk the run across your space
Lay the cable out to check the 5M reach against your play area before you start a session.
- 4Clip the slack
Use the included clip on a desk edge or wall, and leave the loops wide rather than tight.
- 5Open Link and confirm the connection
Start Link from the headset or PC software and check the feed before you move around.
Everything you need to run the cable
- 5M USB 3.0 Type-A to Type-C cable×1
Right-angle USB-C end, gold-plated contacts, mesh-shielded core.
- Cable clip×1
Holds the slack along a desk edge or wall.
Characteristics
Reviews
Questions and answers
Yes, it is a USB 3.0 Type-A to USB-C cable built for connecting an Oculus Quest 2 to a PC for Link mode. Plug the Type-A end into a USB 3.0 port on the PC and the USB-C end into the headset.
The extra length is the point. Five metres covers a full room, and the included clip holds the slack along a desk edge or wall so it stays off the floor. Loose loops left on the floor are the main reason cables snag, so route the slack before you play.
Yes. The cable is rated for USB 3.0 speeds up to 5Gbps, so connect it to a USB 3.0 or faster Type-A port. Avoid unpowered hubs, which can limit the data path and cause dropouts during a session.
The stock cable is short, and a short run pulls on the headset every time you turn. This cable costs less than a replacement headset and removes the snag that interrupts play. The gold-plated connectors, mesh shielding and right-angle plug are the upgrades that matter for daily use.
Gold plating resists corrosion on the contacts, so the join stays cleaner after repeated plugging. Paired with the tinned copper core and mesh shielding, it is a sturdier build than a bare, unbranded cable.
Similar products
See all






