LED Fog Light Bulbs - 30 SMD 4014 Chips - H3 H1 W5W T10 12V
Swap dim factory bulbs for the piercing clarity of 30 SMD 4014 chip LEDs. Available in five colors to match your style and road conditions, these 2-bulb kits drop into H3, H1, W5W, or T10 sockets…
Read the full descriptionDescription
Swap dim factory bulbs for the piercing clarity of 30 SMD 4014 chip LEDs. Available in five colors to match your style and road conditions, these 2-bulb kits drop into H3, H1, W5W, or T10 sockets…
30 SMD chips deliver ultra-bright fog and headlight illumination in multiple colors
- dim factory lighting
- poor visibility in fog
- aesthetic customization
- energy efficiency
30 SMD Chips Deliver Ultra-Bright Fog and Headlight Illumination
Drop these dual-pack bulbs into your H3, H1, W5W, or T10 sockets for instant visibility that cuts through fog, rain, and darkness. Five color options let you match your style and driving conditions.
What Makes This Bulb Stand Apart

30 SMD 4014 Chip Array
Each bulb packs 30 high-output 4014 SMD LEDs, delivering a dense, even beam that outshines standard halogens without draining your battery.

Five Color Modes
Switch between white, ice blue, yellow, and red to match visibility needs or achieve a custom look. Perfect for fog, night driving, or show cars.

Precision Lens & 360° Output
The focused optics and radial LED placement eliminate hot spots and throw light exactly where you need it—on the road.
Performance Metrics
- 30 SMDChips per bulb
- 5 colorsCustomisable output
- 12VLow-draw power
- 2 bulbsComplete upgrade pack
Install Your New Bulbs in Minutes
- 1Power Off and Cool Down
Turn off your vehicle and let the existing bulbs cool for at least 10 minutes. Hot bulbs can burn you and are fragile.
- 2Remove the Old Bulb
Access the bulb housing (check your manual). Twist the old bulb counterclockwise or unclip the retainer, then gently pull it out.
- 3Insert the LED Bulb
Line up the new LED bulb with the socket and push it in firmly. If it doesn’t seat easily, don’t force it—check the orientation.
- 4Test and Enjoy
Turn on your lights to confirm they work. If a bulb doesn’t light, flip it 180 degrees—LEDs are polarity-sensitive. Then hit the road.
Will It Fit?
- 16 mmDiameter
- 45 mmLength
Compact dimensions fit most fog light and headlight housings. Compare with your existing bulb before ordering.
Why These Beat Stock Halogen
| This | Halogen | |
|---|---|---|
| Brightness | 30 SMD chips, ultra-bright | Single filament, dimmer |
| Lifespan | ~50,000 hours | ~1,000 hours |
| Color options | 5 (white, ice blue, yellow, red) | Yellowish only |
| Heat management | Aluminium heat sink | None |
| Energy draw | Low 12V draw | Higher 12V draw |
Characteristics
Reviews
Questions and answers
Check your vehicle’s bulb socket type. This kit includes H3, H1, W5W, and T10 options—the most common fog and headlight sockets. Always verify your owner’s manual before ordering.
Yes. Each bulb has 30 SMD 4014 chips that produce a cleaner, more intense light than a single halogen filament. You’ll notice a wider, whiter beam immediately.
Absolutely. Yellow and ice blue are especially effective in fog, rain, or snow, while white gives daytime-like clarity. You can choose based on your local weather.
Regulations vary by region. In many places, LED conversions are intended for off-road or show use. Check your local laws regarding aftermarket lighting before installing on public roads.
With a built-in aluminum heat sink and efficient 4014 chips, these bulbs are rated for up to 50,000 hours—far longer than halogen. No filament to burn out.
Most vehicles need two bulbs for fog lights or headlights. Buying a pair saves you time and money compared to single bulbs. It’s the practical choice.
Similar products
See all





