Leak-Proof Cycling Water Bottle, 620ml Lockable Lid

Leak-proof when it matters most

Stays sealed upside down

The flip lid locks, and the body holds water when inverted. Tossed in a jersey pocket or dropped into a bar bag, the bottle stays dry. Lock the lid before it goes in, and the seal does the rest.

Sip with one squeeze

The medical silicone nozzle closes between sips and opens on squeeze. The adjustable injection valve sets how much comes out, so a light sip on a flat stretch and a steady trickle on a climb both work without stopping.

Fits the cage and the bag

Ergonomic side grip contours hold the bottle steady in a standard cage. At 76-105g, it adds little weight to the bike, and the 620ml body is 20.5 cm tall, slim enough for most bags.

Lock, squeeze, sip, repeat

1. 1
   Fill and lock

   Fill the bottle and lock the flip lid. Turn it upside down over a sink to check the seal before your first ride.

2. 2
   Set the valve

   Turn the adjustable injection valve to the flow you want. Test it over a sink first and turn it gently within its range.

3. 3
   Squeeze one sip

   Mount the bottle in the cage, then squeeze the body to push water through the silicone nozzle without taking your hand off the bar.

4. 4
   Lock and stow

   Close the nozzle cap and lock the lid again before the bottle goes into the bag or the cage.

The story

Clean the lid to keep it tight

• Rinse the nozzle

  Rinse the silicone nozzle and recap it after every ride, then let it air dry.

• Clean the lid parts

  Take the lid apart for cleaning so sugary residue does not build up around the seal.

• Lock before storing

  Lock the flip lid before the bottle goes in a bag or a cage.