Hidden Camera Detector with RF and Infrared Scanner

Two sensors, one pocket-sized sweep

• Radio and infrared in one sweep

  The X13 listens for transmitting signals and uses its ruby-red infrared window to catch lens reflections. That covers devices a radio-only tool misses, including ones that are not sending anything at the moment.

• Read the room with a six-segment bar

  The blue LED bar climbs as the steel probe nears a source. Red and green lights show status at a glance, so you read the result instead of interpreting beeps. No training needed, though the first sweep takes a little practice.

• Built for pocket checks

  The matte black body measures 10.8 cm by 2.5 cm by 1.5 cm. It slips into a jacket pocket or bag, ready for a check the moment you walk in.

A five-minute room sweep, step by step

1. 1
   Power on at the entry

   Press the power button and let the bar settle. Note the baseline reading in the room.

2. 2
   Sweep the bed area

   Move the probe slowly within a few centimeters of headboard, nightstand, clocks and smoke detectors.

3. 3
   Check the bathroom

   Pass the probe along mirrors, vents and fixtures, pausing a few seconds at each.

4. 4
   Finish at the desk

   Check shelves, outlets and electronics. Mark any spot where the bar peaks and check it closely.

What arrives in the box

• X13 camera detector×1

  Matte black body with steel probe

Why a visual check is not enough