Gold-Plated Replacement Cable for Bose QC35 QC25 OE2
Your headset still works, so the cable is the only thing standing between you and wired sound. This replacement pairs gold-plated 3.5mm and 2.5mm plugs with an inline control sleeve, so the QC35, QC25 and OE2 are back to full wired use on the train, the plane or at your desk.
Read the full descriptionDescription
Your headset still works, so the cable is the only thing standing between you and wired sound. This replacement pairs gold-plated 3.5mm and 2.5mm plugs with an inline control sleeve, so the QC35, QC25 and OE2 are back to full wired use on the train, the plane or at your desk.
Replacement cable with gold-plated plugs for Bose QC35, QC25 and OE2 headphones
- broken or lost headphone cable
- need for wired listening
- tangled cable storage
Your wired sound, restored in one cable
Snapped or lost cable and no way to listen wired? Swap in a gold-plated replacement built for the QC35, QC25 and OE2, and get back to your commute, flight or desk.
Gold plugs and a jacket made for daily use

Gold-plated plugs that hold the connection
Both the 3.5mm and 2.5mm plugs are gold-plated, which resists corrosion and keeps the contact clean between your headset and your source. The metal stays bright, and the plug housings are finished to sit firmly in the jack without wobble.

Inline controls where your thumb expects them
The ridged inline control sleeve gives your fingers a grip point along the cable. On compatible headsets, the buttons and mic sit where you already reach for them, so you can adjust volume or take a call without digging through a bag. The matte rubber jacket keeps the grip steady in cold hands.
Connect it in under a minute
- 1Plug the 2.5mm end into the headset
Push the 2.5mm plug straight into the headset jack until it sits flush. Do not twist it while inserting.
- 2Connect the 3.5mm end to your source
Plug the 3.5mm end into your phone, laptop or in-flight audio jack. Hold the plug housing, not the wire.
- 3Test both channels and the controls
Play a track, check left and right, then press the inline controls to confirm volume and call buttons respond.
- 4Coil it loosely with the tie loop
Wind the cable in wide loops, not tight wraps, and secure it with the tie loop before it goes in your bag.
Characteristics
Reviews
Questions and answers
Yes. The cable is built for those three Bose models, with a 2.5mm plug for the headset and a 3.5mm plug for your phone, laptop or in-flight system. Check your model name before you order, because a plain 3.5mm cable from another brand may not match the wiring on the headset side.
On a compatible headset, the ridged sleeve sits where the controls are, so volume and call buttons stay within reach while the cable is plugged in. Test both channels and the controls on first use, as the pipeline recommends for any new cable.
Both plugs are gold-plated. Gold resists corrosion, so the contact stays cleaner over time than on bare metal. Hold the plug housing when you unplug it, not the wire, and the solder joints and jacket will last much longer.
No. This is a replacement cable from a third-party maker, matched to the plug layout of the QC35, QC25 and OE2. It gives you wired listening without buying a new headset.
Cheap cables often have loose plugs, a poor fit and inline controls that do not line up. A new headset costs far more than this cable, so a matched replacement is the cheapest way to get wired sound back. You can also keep a cable organizer in your bag to protect the jacket.
Similar products
See all






