Gold Plated HDMI Cable 1080P with Ethernet, 0.5m-15m

Yes, it connects to a 4K TV and carries a 1080P signal. The cable is rated for 1080P HD transmission, so 4K detail will not come through it. If both your source and your TV run at 4K, choose a cable rated for 4K. For laptops, consoles and TV boxes set to 1080P, this cable does the job.

Gold resists corrosion, which keeps the contact points clean and conductive as you plug and unplug over time. That matters most when the cable moves between devices. It is a practical build detail, not a magic upgrade, and it pairs with the braided jacket and strain-relief housings to keep the connection steady.

Measure the path from the device to the screen, add a little slack, then pick the nearest length above it. Lengths run from 0.5m for a close setup to 15m for a projector or TV across the room. A longer cable than you need only adds clutter behind the stand, and it does not improve the picture.

The cable is listed with Ethernet, so it can carry a network connection alongside the video on supported devices. To connect a laptop to a monitor, plug one HDMI end into the laptop and the other into the monitor, then set the display to mirror or extend.

The jacket is braided nylon with rubber-coated housings and reinforced strain relief at both ends. Hold the housing, not the wire, when you unplug. Doing that keeps the joint tight through regular use in a home theatre, gaming or meeting room setup.

Bundled cables are usually short, unlabelled and unknown in build. This one gives you a known length from 0.5m to 15m, gold-plated contacts and a braided jacket. A cable that fails at the wrong moment costs more time than one well-made cable at the start.