Clear Suction Cup Bathroom Hook, No-Drill Towel Hook
Hang towels, loofahs and jewelry on bathroom tile without a drill or a sticky strip. The clear dome and silver bow look like decor, and the vacuum base lifts off clean when you move out.
Read the full descriptionDescription
Hang towels, loofahs and jewelry on bathroom tile without a drill or a sticky strip. The clear dome and silver bow look like decor, and the vacuum base lifts off clean when you move out.
Drill-free, scratch-free bathroom hanging with powerful suction and a stylish bow design
- no place to hang towels without drilling
- damaging tiles or walls with adhesive or nails
- cluttered bathroom accessories
- renter-friendly wall storage
Hang Your Bathroom Essentials Without a Single Hole
Towels dripping on the floor and loofahs crowding the tub edge become a tidy, stylish corner. Your tile and walls stay exactly as they were.
Crystal-look dome, silver bow, quietly practical

Holds on tile, leaves no trace
Press the base onto clean, smooth tile or glass and the vacuum seal grips. Lift one edge slowly to release it, and the surface comes away with no residue and no scratches. It sits flush against tile, so the hook looks built into the wall.

A crystal-look dome
The clear textured dome catches the light like cut glass, and the silver bow turns a utility hook into bathroom decor. Pearl-bead accents on the sample hook add a finished detail. Three hooks on one tile wall carry a bracelet, a bath brush and a scrunchie without looking crowded.

Room for a towel edge
The fold-out arm gives loofahs, scrunchies and light towels a place to hang. Buy the two-pack or the three-pack and spread the hooks across the shower wall, the mirror edge and the tile by the sink.
Stick it in three steps, no tools
- 1Clean and dry the spot
Wipe the tile, glass or mirror with a dry cloth. Soap film and moisture block the seal, so make sure the surface is fully dry.
- 2Press the dome flat
Set the suction base flat on the surface and press firmly over the dome until the seal feels tight against the wall.
- 3Let it set, then hang
Give the seal a moment before you load it. Start with a lighter item like a scrunchie or bracelet to see how it holds.
A few habits keep the seal strong
- Wipe the base dry
Dry the base and the tile around it before each use so the seal grips.
- Choose smooth surfaces
Glossy tile, glass and mirror suit the base best. Avoid grout lines and textured tile.
- Lift to release
Lift one edge slowly to break the seal instead of pulling the hook straight off the wall.
Characteristics
Reviews
Questions and answers
Yes for lighter loads. It is built for loofahs, a hand towel, a wash mitt, jewelry and hair ties. A heavy bath towel soaked through hangs better across a rail. Dry the tile before pressing, because damp tile and soap film weaken the seal.
Use it on smooth, glossy tile, glass and mirror. The base needs a flat surface to seal, and a grout line or bumpy texture stops the vacuum from forming a full seal.
Nothing adhesive touches the wall, so there is nothing to peel. Lift one edge slowly, then peel the base off. Wipe the spot dry and the tile looks the way it did before.
Plain suction cups without hooks still need a separate hanger, and most plain steel hooks look utilitarian and slip more when wet. This one is a complete clear hook with a silver bow. A torn tile or a painted wall costs far more than a hook at the end of a lease, and this one comes off clean.
Yes, as long as the glass is clean and flat. A mirror edge at eye level works well for bracelets and earrings. Keep it off the frame seal, since the base needs an unbroken flat surface.
Similar products
See all





