Car Wireless Charger Phone Mount, 10W Fast Charging

A clamp that closes when you place the phone

• Clamps itself as the phone goes in

  The arms sit open, then close around the phone as it settles into the cradle. You do not press a lever or tighten a knob. Once the phone is seated, the arms hold it through stops, turns, and rough pavement. There is no suction seal to lose in summer heat.

• Charges with no cable to tangle

  A 10W Qi charging pad sits behind the phone and charges compatible devices as you drive. The glossy pad carries a charging icon, so you can see that it is working. Keep the cable in the glovebox and the console clear.

• Mounts to the vent, swivels to view

  The adjustable air-vent clip hooks onto a straight slat, and the swivel arm angles the screen toward you. Set it once and the map sits at eye level, so you read the next turn without leaning down.

Mounted in under a minute

1. 1
   Clip the air vent

   Hook the adjustable clip onto a solid, straight vent slat and tighten it so the mount does not droop.

2. 2
   Set the swivel arm

   Angle the arm so the screen sits at eye level. Adjust it once here and you will not need to touch it again on the next drive.

3. 3
   Seat the phone

   Press the phone into the gravity clamp. The arms close on their own, and the phone sits centered on the 10W Qi pad.

The drive without the slide

The slide in the turn

You glance down at the next turn, and the phone has slid toward the footwell again. A suction cup let go on the warm dash, and the cable is somewhere under the seat. Every drive starts with the same small scramble.

The clamp that closes itself

The gravity-activated arms sit open until the phone goes in. Set the phone down and the arms close around it without any pressing or twisting. The grip comes from the mount itself, not from a suction seal that has to stay clean.

Arrive with a full battery

The map stays in view at eye level, and the battery climbs on the 10W Qi pad while you drive. You step out with the phone charged and never reached for a cable.

What to expect over your first weeks

1. First use
   Mounted in under a minute

   Clip the vent, set the swivel arm, and place the phone. Adjust the arm once to find the angle where you can read the screen without leaning.

2. 3 uses
   The clamp habit settles in

   After a few drives you will know how far to press the phone into the arms. Most of the sliding stops once the phone is seated correctly.

3. 30 days
   A cable-free routine

   Charging on the pad becomes the default for commutes. Check the phone now and then for warmth on long wireless sessions and keep the pad clear of debris.