55-char placeholder

Questions and answers
New
About this itemAll characteristics
TypeGarden Tools > Lawn Mower Accessories > Brush Cutter Blades
From the seller

Six hardened steel teeth turn tall grass and woody brush into cleared ground in a single sweep. The 245 mm head is built to cut thick growth where a nylon line head stalls and wraps.

Read the full description

Description

Six hardened steel teeth turn tall grass and woody brush into cleared ground in a single sweep. The 245 mm head is built to cut thick growth where a nylon line head stalls and wraps.

Six-tooth 65Mn steel blade head for fast clearing of grass and brush

Solves
  • tall or thick grass
  • weeds and brush clearing
  • slow manual trimming

Clear Thick Brush in One Pass

Tangled weeds and tall grass stall a line trimmer and eat your weekend. A six-tooth 65Mn steel head turns that job into a clean, fast sweep.

Six Hardened Teeth Built for Thick Growth

  • Six hardened steel teeth

    Six pointed 65Mn steel teeth are spaced evenly around the disc. They bite into tall grass and light brush that would bog down a nylon line head, and they keep the sweep even from edge to edge.

  • A hub that fits your shaft

    The head has a 25 mm center bore and six mounting holes. Check your shaft before you order, then bolt it on and go. It sits on the shaft the same way the stock head does.

  • A 245 mm sweep per pass

    At 245 mm across and 48 mm blade length, each pass covers a wide strip of ground. The dimension drawing lets you check coverage against your job before you start.

Fit it and make the first pass

  1. 1
    Check the bore

    Confirm your shaft matches the 25 mm center bore before you start.

  2. 2
    Align the six holes

    Line up the six mounting holes with your trimmer hub and fit the bolts.

  3. 3
    Tighten and spin check

    Tighten every bolt, then turn the head by hand to confirm it runs true.

  4. 4
    Sweep in overlapping passes

    Keep the blade low, work at a steady pace, and clear the largest growth first.

Actual size on the ground

  • 245 mmOverall diameter
  • 48 mmBlade length
  • 25 mmCenter bore

About the width of a standard dinner plate

Characteristics

Main
TypeGarden Tools > Lawn Mower Accessories > Brush Cutter Blades
Details

Reviews

Questions and answers

Will this fit my brush cutter shaft and 25 mm bore?
w
Wanelo · seller

The center bore is 25 mm. Measure your shaft and compare it with the bore before ordering. A 25 mm bore matches most standard brush cutter shafts.

Does it fit a six-hole mounting pattern on my trimmer?
w
Wanelo · seller

The head has six mounting holes. Lay it against your existing head or the mounting plate and confirm the hole pattern lines up before you tighten anything.

Is a metal blade safe around gravel, rocks and pets?
w
Wanelo · seller

Metal blades throw debris at speed. Wear eye and leg protection, clear stones from the area, and keep people and pets well back. Metal blades are built for brush and tall growth, not for edging against hard surfaces at close range.

How is this different from a nylon line head?
w
Wanelo · seller

Nylon line wraps around thick stems and wears down quickly in woody brush. Six hardened steel teeth cut the stems outright, so the job moves in fewer passes. The price is higher than a line head, but one blade head replaces many spools of line on heavy clearing days.

How do I keep the steel teeth sharp?
w
Wanelo · seller

Check the bolts before every session and clear wrapped debris from the hub after each run. Inspect the teeth for chips and nicks. Keep the head tight and clean, and the cut stays consistent for the whole season.

Similar products

See all
55-char placeholder
$59.90