Skip to content

Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter

Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
New
1 / 7
About this itemAll characteristics
TypeConsumer Electronics > Audio Accessories > Bluetooth Receivers
Bluetooth version5.0
ChipQCC3008
Transmit range10m
Battery110mAh polymer
Charging time2h
From the seller

Your wired headphones and older car stereo can go wireless in seconds. This Bluetooth 5.0 receiver plugs into any 3.5mm jack, pairs with two phones at once and handles calls without interrupting music. Keep the gear you already own and lose the cord.

Read the full description

Description

Your wired headphones and older car stereo can go wireless in seconds. This Bluetooth 5.0 receiver plugs into any 3.5mm jack, pairs with two phones at once and handles calls without interrupting music. Keep the gear you already own and lose the cord.

Turn any wired 3.5mm headphones into Bluetooth 5.0 wireless headphones in seconds

Solves
  • Old wired headphones or car stereo with no Bluetooth
  • Cables tangling and restricting movement
  • Juggling calls and music on two phones

Turn wired headphones wireless in seconds

Your current earbuds still sound fine, but they tie you to the phone. Plug in this 3.5mm Bluetooth 5.0 receiver and the cord is gone for music, calls and car drives.

Everything wired gear was missing

Receiver beside a phone playing music with its 3.5mm plug inserted

Cords gone, sound kept

The receiver plugs into the 3.5mm jack of your existing headphones and streams music over Bluetooth 5.0 with a stated 10m range. Keep the phone in the same bag or pocket and the link stays put. Your favorite wired earbuds stay in use, and the you need is already built in.

Receiver connected to two phones while handling a call

Two phones, one receiver

The receiver connects two phones at the same time and switches between them. Music can keep playing from one phone while a call arrives on the other. A work phone and a personal phone can share the same headphones without re-pairing each morning.

Close-up of the internal circuit board with QCC3008 chip and battery

Clear calls, small build

An HD noise-reduction microphone sits in the unit, and the multifunction button answers calls without pulling out your phone. The 110mAh polymer battery and QCC3008 chip sit inside a compact matte black body that clips to a collar or bag strap.

Numbers you can check

  • 10mWireless transmit range
  • 110mAhPolymer battery capacity
  • 4-5hTypical use time
  • 2hCharging time

Plug in, pair, and go

  1. 1
    Plug it into your audio source

    Insert the receiver into the 3.5mm jack of your headphones, or into the aux port of your car or home stereo.

  2. 2
    Give it a short charge

    The 110mAh battery needs only a brief charge to start. A full charge takes about 2 hours, so top it up when you have a spare moment.

  3. 3
    Pair from your phone

    Switch the receiver on, open your phone's Bluetooth menu and select it. The pairing holds for the next session.

  4. 4
    Use the buttons

    The +/- keys set the volume, and the multifunction button answers or ends calls without touching your phone.

What you get

  • Bluetooth audio receiver unit×1

    Matte black body with blue-tinted edges and a red accent ring

  • 3.5mm audio cable×1

    As shown in the product photos

From tangled cords to cord-free

Bluetooth receiver shown in everyday product photography

The cord that holds you back

Wired earbuds snag on bag straps and gym gear every time you move. The cable also keeps you tied to the phone in your pocket. Older car stereos have the same problem, since they can only play what is plugged into the wire.

Receiver photographed as a compact everyday accessory

The fix you already own

The headphones in your drawer can go wireless with one small part. The receiver plugs into the 3.5mm jack you already use, then pairs with your phone over Bluetooth 5.0. For a car, the same idea works through the aux port, and a setup keeps the stereo you already have.

Compact Bluetooth receiver ready to clip onto a bag

Cord-free, one plug away

Setup takes about a minute and needs no app. Charge it briefly, pair from your phone's Bluetooth menu, and clip it to a bag strap or waistband. Music on the commute, calls at the desk and workouts all run without a cord.

Keep what you own

This receiverNew wireless earbudsFM transmitter
Keeps your current wired headphones —
Bluetooth 5.0 pairing —
Plugs into a 3.5mm jack ——
Upfront costLowHighLow

Characteristics

Main
TypeConsumer Electronics > Audio Accessories > Bluetooth Receivers
Details
Bluetooth version5.0
ChipQCC3008
Transmit range10m
Battery110mAh polymer
Charging time2h
Typical use time4-5h
Audio input3.5mm audio jack
Phone connectionsTwo phones at the same time
MicrophoneHD noise reduction
Controls+/- volume, multifunction button, indicator light
ColorsMatte black, midnight blue, carmine red

Reviews

Questions and answers

Will it work with my wired headphones or car aux input?
w
Wanelo · seller

If your headphones, earphones or car stereo have a 3.5mm audio jack, yes. The receiver plugs into that jack and passes the sound to your phone over Bluetooth. Devices with no audio input will not work, so check for a 3.5mm port before you order.

How long does the battery last and how long does it take to charge?
w
Wanelo · seller

The 110mAh polymer battery takes about 2 hours to charge and runs for roughly 4 to 5 hours of use. That covers a full commute or a long gym session. You do not need to charge it fully before the first pairing.

Can it connect to two phones at once?
w
Wanelo · seller

Yes. The receiver connects two phones at the same time and switches between them. Music can keep playing from one phone while calls come in on the other.

Does it work from 10m away, and what can cause dropouts?
w
Wanelo · seller

The stated transmit range is 10m. Keep your phone in the same pocket or bag and the signal stays steady. A phone left in a far pocket or behind a thick wall is the most common cause of a dropout.

Does it need an app or driver to set up?
w
Wanelo · seller

No. Switch the receiver on, open your phone's Bluetooth menu and select it. There is no app and no driver to install.

Is it worth it compared with buying new wireless earbuds?
w
Wanelo · seller

New wireless earbuds cost far more than this receiver, and they leave your working wired headphones in a drawer. One small receiver costs less than a single pair of new earbuds and keeps the headphones you already use every day.

Similar products

See all
Bluetooth 5.0 Receiver: Wireless 3.5mm Headphone Adapter
$54.90