Skip to content

Bluetooth Car AUX Adapter for Older Stereos, Hands-Free

+1
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
New
1 / 8
About this itemAll characteristics
TypeCar Electronics / Bluetooth Audio Adapters
Bluetooth version5.0
Audio output3.5mm AUX plug
Power inputUSB-A plug
MicrophoneBuilt-in, for hands-free calls
CableCoiled 3.5mm AUX cable
Color: Black
From the seller

Your older car can stream music and take hands-free calls without a new stereo. This brushed metal receiver plugs into the AUX port you already have, with Bluetooth 5.0 and a built-in mic. Pair it once and the commute runs on your phone.

Read the full description

Description

Your older car can stream music and take hands-free calls without a new stereo. This brushed metal receiver plugs into the AUX port you already have, with Bluetooth 5.0 and a built-in mic. Pair it once and the commute runs on your phone.

Turn any car's AUX port into a wireless Bluetooth audio input for HiFi sound and hands-free calls

Solves
  • No Bluetooth in older car stereo
  • Wired phone connection hassle
  • Hands-free calling without built-in car Bluetooth

Wireless music and calls for any car with AUX

Your stereo still works, but your phone needs a cable to reach it. This receiver plugs into the AUX port you already have, so your music and calls stream wirelessly from the first drive.

Bluetooth and hands-free calling for your current stereo

Receiver seated in a car AUX port with a phone nearby

Bluetooth 5.0 audio for your stereo

Bluetooth 5.0 connects your phone to the receiver, and the receiver feeds the audio into the car through the AUX input your stereo already has. Pair it once and the phone reconnects on its own for the rest of your drives.

Close-up of the metal dongle showing its built-in microphone

Hands-free calls from the wheel

A built-in microphone sits on the receiver, so calls run through the car speakers and you never pick up the phone. Speak at a normal volume and keep your eyes on the road.

Macro of the brushed metal housing and gold-plated USB contacts

Brushed metal, compact build

The housing is brushed metal, so it feels solid in the hand and does not look like a cheap plastic plug. The body is small enough to stay in the port and sits close to the dash instead of hanging out like a loose cable.

Connected in three steps, no tools

  1. 1
    Plug the AUX cable into the car

    Push the coiled 3.5mm plug fully into your car's AUX port until it sits firmly.

  2. 2
    Power the receiver over USB

    Plug the USB-A body into a USB port in the car. Use a port that stays on while you drive.

  3. 3
    Pair your phone

    Turn on Bluetooth on your phone, select the receiver, and choose it as the audio output. Set the phone to about three-quarters volume before you start the drive.

Everything you need, nothing to install

  • Bluetooth receiver with USB-A body×1

    Brushed metal housing with built-in microphone

  • 3.5mm AUX audio cable×1

    Coiled cable that plugs into the car's AUX port

Your stereo was never the problem

The cable that never stays put

Most drives start the same way. You dig out a short AUX cable, run it from the phone to the dash, and then spend the trip watching it slide off the seat. A wired phone ties you to one spot, and a call that comes in mid-drive means either ignoring it or reaching for the phone at a red light.

The port you already have

Your car already has the input it needs. The AUX port that has sat unused since your phone stopped using a headphone jack is enough, along with a USB port for power. Plug the receiver into form, pair it once, and the stereo becomes a wireless input without any new hardware in the dash.

A quieter, hands-free drive

With the receiver in place, music and podcasts come from your phone through the speakers you already own. When a call arrives, the built-in microphone picks up your voice in the cabin, so you can talk while both hands stay on the wheel. The commute stops being a cable problem and goes back to being a drive.

Cheaper than a new stereo, cleaner than FM

This receiverHead-unit swapFM transmitter
Installation neededNoYesNo
Bluetooth audioYesYesNo
Hands-free callsYesYesPartial
Clean signal without tuning a stationYesYesNo
Moves to another carYesNoYes

Characteristics

Main
TypeCar Electronics / Bluetooth Audio Adapters
Color2 options
Details
Bluetooth version5.0
Audio output3.5mm AUX plug
Power inputUSB-A plug
MicrophoneBuilt-in, for hands-free calls
CableCoiled 3.5mm AUX cable
HousingBrushed metal
IncludedReceiver with USB-A body, 3.5mm AUX cable

Reviews

Questions and answers

Does my car need an AUX port and a USB port?
w
Wanelo · seller

You need an AUX input (3.5mm) for the audio and a USB-A port to power the receiver. Most cars from the mid-2000s on have one or both. If your stereo has an AUX jack but no USB, the receiver will not power up, so check both before you buy.

Will it work with my older stereo?
w
Wanelo · seller

Yes, as long as the stereo has a 3.5mm AUX input. The receiver does not replace the head unit. It turns the existing AUX jack into a wireless source, so your stereo stays exactly as it is.

Does the sound quality hold up compared with a wired cable?
w
Wanelo · seller

Calls come through clearly. Music depends on your phone volume and your stereo. Set the phone to about three-quarters volume and adjust the car stereo from there, because a maxed-out phone pushes the signal into distortion. A factory Bluetooth system will still sound a step ahead, but this costs far less than a head-unit replacement.

Can I use it for hands-free calls?
w
Wanelo · seller

Yes. The built-in microphone picks up your voice in the cabin, so you can talk through the car speakers without holding the phone. It is built for calls on the drive, not studio-grade recording.

Is setup difficult?
w
Wanelo · seller

No tools are needed. Push the 3.5mm plug into the AUX port, plug the USB-A body into a USB port, then pair your phone over Bluetooth 5.0. The first pairing takes a few minutes, and after that the phone reconnects on its own.

Similar products

See all
Bluetooth Car AUX Adapter for Older Stereos, Hands-Free
$49.90