3.5mm Headset Mic Extension Cable for PC & Mobile Gaming

Braided sleeve, gold plugs, zero compromise

• Mic stays live on one jack

  The plug is a 4-pole TRRS design, so the mic contact travels down the extension alongside your game audio. Gold-plated contacts and strain-relief sleeves on both plugs protect the connection right where cheap cables fail, at the plug itself.

• Split port for shared use

  The black Y-splitter adds a second 3.5mm female port, so one run can serve your headset and a second device or mic. You stop swapping plugs mid-session and keep both connections in one place.

• Braid that survives the desk

  The red and black braided nylon sleeve lies flatter than bare wire and resists kinks during daily use. An inline ferrite bead filters out electrical noise along the run, so the chat sounds clean.

Plug in once and forget the wiring

1. 1
   Seat the gold-tipped plug

   Push the 4-pole plug into your device's headset port until it clicks in fully.

2. 2
   Connect your headset

   Plug the headset's 3.5mm connector into the female jack at the far end of the run.

3. 3
   Use the split port for a second device

   Plug a mic or a second device into the black Y-splitter port when you need both on one line.

4. 4
   Leave slack at the desk edge

   Run the braid along the desk edge with a loop of slack, so leaning back never pulls on the plugs.