10 FT Solar LED Patio Umbrella with Cantilever Offset
Shade through the afternoon and a soft glow over the table once the sun drops. This 10 ft cantilever umbrella lights its own canopy with 32 solar LED ribs, so the evening stays open after dinner. The offset arm keeps the center of the table clear for every plate.
Read the full descriptionDescription
Shade through the afternoon and a soft glow over the table once the sun drops. This 10 ft cantilever umbrella lights its own canopy with 32 solar LED ribs, so the evening stays open after dinner. The offset arm keeps the center of the table clear for every plate.
Solar-powered 32-LED umbrella lights up your patio after sunset
- dark patio after sunset
- center pole blocking table space
- needing shade and ambient light in one product
Keep your patio glowing after the sun goes down
Dinner used to end when the light faded and the pole got in the way. Now the offset canopy gives you shade by day and 32 solar LED ribs that light the table after dusk.
Light that lives inside the canopy
- 32 lights along every rib
Thirty-two LEDs sit along the ribs, so the light spreads across the whole canopy instead of coming from one lamp. The black ribbed strips lie flat against the frame and stay out of the way when the umbrella is closed.
- Open center, clear table
The offset arm supports the canopy from the side, so no pole stands between you and the platter. Seating can sit underneath without a post in the way, and the table stays free for serving dishes.
- Easy-open adjustment
The canopy opens easily and the crank tilts it to follow the sun across the afternoon. Turn the crank to move the shade toward the lounger or the table without shifting the whole base.
Set it up before dusk
- 1Check the parts
Lay out the canopy, the cantilever pole and the cross base. Confirm all arms and fittings are present before you start.
- 2Set the base on level ground
Place the cross base on even footing and keep the pole upright. An offset umbrella puts side load on the base, so check that it sits flat before you open the canopy.
- 3Open and tilt
Open the canopy with the easy-open adjustment, then use the crank to angle the shade toward the table or the lounger.
- 4Park it in full sun
Leave the canopy where its solar panel gets direct daylight through the afternoon so the ribs charge before the first evening.
Canopy, pole and base
- Umbrella canopy with LED ribs×1
Taupe polyester with the solar panel on top
- Cantilever pole×1
Offset arm with crank tilt
- Cross base×1
Foundation for stability on level ground
Dinner ends when the light fades

The table goes dark first
Evening outside ends when the light fades. A standard umbrella drops its pole right over the middle of the table, so platters get pushed to the edges. String lights help, but they need an outlet or batteries and rarely look like they belong on a patio you actually use.
One umbrella, two jobs
The cantilever arm holds the canopy from the side, so the table stays open. Thirty-two LEDs run along the ribs and the solar panel on top charges them through the day. You get shade in the afternoon and a soft glow once the sun drops.
One umbrella instead of a pole and a string
| This umbrella | Center-pole umbrella + string lights | Center-pole umbrella | |
|---|---|---|---|
| Table space | Clear, offset arm | Pole in the middle | Pole in the middle |
| Light after dusk | Built-in LED ribs | String lights, separate | None |
| Power | Solar panel | Outlet or batteries | None |
| Setup | One unit | Umbrella plus wiring | One unit |
| Shade by day | Yes | Yes | Yes |
Characteristics
Reviews
Questions and answers
The panel charges best with direct daylight on the canopy top through the afternoon. A spot in deep shade all day leaves the ribs with a weak or short glow, so pick a place where the top of the canopy gets sun for most of the day.
The cross base is the foundation, and an offset umbrella puts side load on it. Set it on level ground, check that it sits flat, and close the canopy in strong wind. Do not leave it open on uneven footing.
String lights need an outlet or batteries and still leave a pole in the middle of the table. This umbrella puts shade and light into one piece, so you pay once for both jobs and keep the table clear for the whole evening.
Open the canopy, then use the crank to tilt it. The offset arm lets you move the shade over the lounger or the table without shifting the base, so the adjustment happens while you sit.
The set includes the umbrella canopy with LED ribs, the cantilever pole with crank tilt, and the cross base. Check that all arms and fittings are present before you start assembly.
Similar products
See all