Waterproof Interlocking Deck Tiles, 12 x 12 in, 36 Pack
Click twelve-inch tiles together over the floor you already have and walk out onto a warm, wood-look deck. The 36-tile pack is waterproof, drains through the slats and installs without tools.
Read the full descriptionDescription
Click twelve-inch tiles together over the floor you already have and walk out onto a warm, wood-look deck. The 36-tile pack is waterproof, drains through the slats and installs without tools.
Waterproof interlocking plastic deck tiles that turn bathrooms, balconies and patios into a tidy, wood-look floor
- wet or slippery floors
- unfinished concrete or tile surfaces
- tools-free installation hassle
Turn a cold, wet floor into a warm wood-look deck
Tired tile and bare concrete that stay slick and stained all year. Snap on 36 waterproof slatted tiles and the same floor becomes a finished, drainable deck you can walk on barefoot.
Slatted tiles that clip together and shed water

Clip on, no tools needed
Tiles lock edge to edge, so the floor forms without tools, grout or adhesive. Lift a tile out and reset it whenever you want.

Slats that let water through
Gaps between the slats let water pass instead of pooling on the surface, so showers and rainy patios stay usable.

Wood-grain look, plastic build
The matte, textured charcoal surface reads as wood-look while the plastic stays waterproof. Everyday marks barely show.
Snap them together without tools or grout
- 1Clear and dry the surface
Sweep the floor and let any standing water drain or dry.
- 2Dry-fit a row
Lay a row without locking to check how it meets the walls.
- 3Click tiles together
Press the interlocking edges until each tile seats, working outward from the door.
- 4Trim the edges
Cut edge tiles to fit corners and fixtures, then walk it in.
From a floor you put up with to one you like
The floor you put up with
Cold tile, darkened grout, concrete that looks tired no matter how often you sweep. Every wet season it gets slicker, and a full renovation feels too big to start.
A quick way to change it
Each 12 x 12 in tile clicks into the next. No tools, no grout, no sealing. Lay them over the tile or concrete you already have and tear nothing out.
What it feels like after
The floor reads as a finished wood-look deck. Water drains through the slats, it rinses clean, and it feels warmer underfoot than bare tile.
Rinse off the wet season, keep the finish
- Rinse with water
A regular rinse clears dirt through the slats.
- Mild cleaner
Use a soft brush on the slats when needed.
- No harsh solvents
Skip abrasive pads that can scratch the texture.
- Check seams
Reset any loose tile before it becomes a trip hazard.
Characteristics
Reviews
Questions and answers
Each tile is 12 x 12 in (30 x 30 cm) and the pack has 36. Measure your width and length in feet, multiply them, and that is your tile count. Edge tiles can be trimmed to fit corners.
The matte, textured slats and drainage gaps keep water from sitting on top. Always clear standing water and soap film from the surface before you step on it.
Yes. They are made to sit over tile, concrete and other hard floors. Clear standing water and let the surface dry before you lay the first row.
They are plastic with a matte, wood-grain-like charcoal finish. Up close it is clearly a tile, from standing height it reads as a slatted deck.
Yes. Tiles lift out and can be reset, so nothing is permanent.
One pack covers a real area with no contractor, no demolition and no grout. Compared with re-tiling or resurfacing, it is a fraction of the cost and a weekend of work.
Similar products
See all





