Full Face CPAP Mask — Comfortable Anti-Snoring Sleep Apnea

Engineered for Comfort and Compliance

Medical‑Grade Silicone Interface

The clear, hypoallergenic silicone forms a soft but precise seal around the nose. Micro‑perforations reduce skin contact area while maintaining therapy pressure, so you avoid the red marks common with flat pads.

Universal Adjustable Headgear

Four independent tension straps — top, sides, and back — let you micro‑adjust the fit for any face shape. The soft fabric forehead support eliminates pressure points, and the memory‑style buckles hold your settings night after night.

Quick‑Release Connectors

One‑click tabs on each side detach the mask from the headgear without losing your strap settings. Perfect for nighttime bathroom trips or morning routines — no more wrestling with a full harness.

Built for Lasting Performance

• 95%of adult face shapes accommodated
• 360°leak‑free perimeter design
• 10,000+hours tested in real‑use lab simulations
• 4.2ozcomplete with headgear — light enough to forget

Your First Night Setup

1. 1
   Unpack and Inspect

   Lay out all components: mask assembly, headgear, nasal interface, connection tube adapter, and cushion seals. Wash your face and hands thoroughly.

2. 2
   Attach the Headgear

   Clip the headgear straps onto the mask frame. Leave them loose for now. Connect your CPAP tube to the adapter at the front of the mask.

3. 3
   Fit the Mask

   Place the mask over your nose first, then pull the headgear over your head. Center the forehead support and tighten the top straps until snug but not tight.

4. 4
   Fine‑Tune and Test

   Turn on your machine and lie in your usual sleep position. Gently pull the mask away and re‑seat it to activate the seal. Adjust the side straps until you feel no leaks. You’re ready.

From Restless Nights to Restful Sleep

What to Expect

1. Week 1
   Sleep Quality Improves

   You start falling asleep faster without wrestling the mask. Your partner mentions less snoring. Morning fogginess may decrease.

2. Week 2–4
   Full Compliance Achieved

   The mask no longer feels intrusive. You wear it for 7+ hours consistently. Objective data from your CPAP machine shows fewer apnea events and higher usage hours.

3. Month 2+
   Daytime Energy Boost

   With uninterrupted deep sleep each night, daytime fatigue lifts. You recover zest for daily activities — the real measure of successful therapy.

How to Clean Your Mask

• Daily Wipe

  After use, wipe the silicone cushion with a soft, damp cloth and mild unscented soap. Rinse with water. Air dry.

• Weekly Wash

  Separate the cushion from the frame. Soak in warm water with mild soap for 10 minutes. Gently scrub with a soft brush. Avoid alcohol or bleach.

• Air Dry Only

  Lay flat on a clean towel away from direct sunlight and heat. Do not use a hair dryer or microwave.

• Replace on Schedule

  Silicone loses softness over time. Replace the cushion every 3–6 months or when it becomes sticky or cloudy. Headgear lasts 6–12 months.

How Much Space It Takes

• 12 cmHeight
• 14 cmWidth (at widest point)
• 18 cmDepth (cushion to back of headgear)
• 7 x 9 cmMask only (no headgear)

Roughly the size of a large grapefruit when worn. The mask alone is palm‑sized.

Why This, Not That