Steel Wire Trimmer Head for Weeds and Dust Removal
Your string trimmer already has the reach. This steel wire head gives it the bite for thick weeds, pavement cracks and dust, so the job finishes in one afternoon. Two sizes, 150mm and 200mm, bolt onto standard shafts with the included hardware.
Read the full descriptionDescription
Your string trimmer already has the reach. This steel wire head gives it the bite for thick weeds, pavement cracks and dust, so the job finishes in one afternoon. Two sizes, 150mm and 200mm, bolt onto standard shafts with the included hardware.
Turn your string trimmer into a steel wire brush cutter for tough weeds and dust removal
- stubborn weeds and thick grass
- dust and debris buildup on paths and edges
- difficult-to-clear cracks in pavement
- string trimmer line failing on tough growth
Clear tough weeds and dust with steel wire power
Stop fighting stubborn weeds with string that snaps. Bolt a steel wire head onto your trimmer and finish fence lines and pavement cracks in one clean pass.
Built around twisted steel wire and a polished backing plate
- Twisted steel wire bristles
Each bristle is a twisted knot of steel, so the head bites into thick weeds and grass where nylon line wraps and snaps. The knots hold their edge through a full clean-up instead of fraying after a few passes.
- Dished steel backing plate
The polished steel plate and central hub keep the head square and stable on the shaft. Tighten the bolt and nut and the head spins true, with no wobble passed down to your hands.
- Fits the trimmer you already own
The head fits standard trimmer and brush cutter shafts. You upgrade the job without buying a second tool, and the same machine handles string work and steel work.
Two sizes, one bolt-on fit
- 150mmSmaller cutting diameter for tight edges
- 200mmWider cutting diameter for larger areas
- 2 pcsWire head plus mounting hardware
Bolt it on and check the balance
- 1Fit the head to the shaft
Set the head on the trimmer or brush cutter shaft and line up the central hub. Seat it with the included nut and bolt.
- 2Tighten the nut firmly
Use a wrench or screwdriver to lock the nut down. A snug fit stops wobble before it reaches your hands.
- 3Run it briefly
Start the trimmer and let the head spin for a few seconds to check balance and clearance before you cut.
- 4Wet the area, then cut
Dampen dusty paths first, then work the head along fences and cracks at a steady pace.
Wire head and mounting hardware included
- Steel wire trimmer brush head×1
150mm or 200mm, with dished polished steel backing plate
- Mounting nut and bolt×1
Secures the central hub to the trimmer shaft
Weeds win until the head goes on
The weeds win every weekend
Thick growth wraps the line along the fence and snaps it within minutes. The trimmer stalls, you re-feed line, and the weeds sit in the driveway cracks waiting for next weekend.
A head that finishes the job
A twisted steel wire head bolts onto the shaft you already have. The trimmer becomes a brush cutter for fence bases, cracks and dust, with no new machine to buy.
Edges that stay clean
Cracks run clear and edges look finished before the lawn work starts. Same tool, same weekend, and a yard that stays in shape for longer.
Why steel wire outlasts nylon on tough growth
| Steel wire head | Nylon string head | |
|---|---|---|
| Holds up on thick, woody weeds | — | |
| Clears pavement cracks | Partial | |
| Needs line re-feeding mid-job | — | |
| Bolts onto the trimmer you own |
Characteristics
Reviews
Questions and answers
It is made for standard trimmer and brush cutter shafts and mounts with the included nut and bolt. Check that your guard clears the head before you run it. If the 200mm head rubs, step down to 150mm.
Use it with care. Steel wire throws debris at speed, so clear loose stones first, wear eye protection and keep bystanders and pets well back. Wet dusty ground before you start.
Nylon line wraps, frays and snaps on thick stems and woody weeds. Twisted steel knots cut through the same growth and keep their shape, so you spend less time re-feeding line.
Pick 150mm for tight edges, cracks and narrow strips. Go with 200mm for wider sweeps and long fence runs. The larger head covers more ground per pass but needs more guard clearance.
Yes. The box has the steel wire head and a nut and bolt for the central hub. You will need a wrench or screwdriver to tighten it.
A steel head costs far less than a dedicated brush cutter and works on the trimmer you already own. If you replace nylon line every weekend on tough growth, the head pays for itself within a few clean-ups.