Skip to content

Stainless Steel Knife Holder with Slotted Core Insert

Stainless Steel Knife Holder with Slotted Core Insert
Stainless Steel Knife Holder with Slotted Core Insert
Stainless Steel Knife Holder with Slotted Core Insert
Stainless Steel Knife Holder with Slotted Core Insert
Stainless Steel Knife Holder with Slotted Core Insert
Stainless Steel Knife Holder with Slotted Core Insert
New
1 / 6
About this itemAll characteristics
TypeKitchen Storage / Knife Holders
From the seller

Your knives sit in one fixed place, the worktop stays clear, and the right blade is always on the first reach. The brushed stainless block fits a small counter at 95 x 95 mm and holds its shape day after day. The grey core lifts out for rinsing, and a drainage hole keeps wet blades...

Read the full description

Description

Your knives sit in one fixed place, the worktop stays clear, and the right blade is always on the first reach. The brushed stainless block fits a small counter at 95 x 95 mm and holds its shape day after day. The grey core lifts out for rinsing, and a drainage hole keeps wet blades from sitting in water.

Find a home for your kitchen knives in a sleek stainless steel block

Solves
  • knives left loose on the counter
  • misplaced kitchen tools
  • wet knives sitting in storage (drainage hole)
  • cluttered worktop

Give your knives a tidy home on the counter

Loose knives scattered across the worktop waste time and invite accidents. This brushed stainless steel block gives every blade a fixed spot, so the counter stays clear and the right knife is always in reach.

A clean steel block that keeps knives in order

Close view of grey slotted core inside brushed stainless steel housing

Steel that looks at home

The brushed stainless housing has a clean square silhouette that sits well beside a range, a kettle or other stainless appliances. The matte finish hides fingerprints better than polished steel.

Angled slots in grey insert with finger notch for easy knife removal

A core you can lift out

The grey slotted insert detaches from the steel housing, so you can rinse it at the sink and let it dry on its own. The drainage hole in the base lets water run out instead of pooling under the blades.

Holder dimensions and weight shown on a technical spec image

Fits the counter you have

The block is 95 x 95 mm at the base and 235 mm tall, so it takes up a small corner without crowding the prep area. At 432 g it stays put on the worktop once it is loaded.

Lift out the core and rinse clean

  • Lift out the core

    The grey slotted insert detaches, so you can rinse it on its own at the sink.

  • Dry blades first

    Dry each knife before it goes back in its slot so moisture does not sit on the steel.

  • Let the base drain

    The drainage hole in the base lets water run out instead of pooling inside the block.

  • Wipe the steel

    A damp cloth keeps the brushed stainless finish clean. Dry it after to keep the look even.

Actual size on your counter

  • 235 mmHeight
  • 95 mmWidth
  • 95 mmDepth
  • 432 gWeight

A square footprint that suits a small worktop corner

Characteristics

Main
TypeKitchen Storage / Knife Holders
Details

Reviews

Questions and answers

Will an 8 inch knife fit the slots?
w
Wanelo · seller

The stand is sized for 8 inch knives. The random insert hole takes blades of varying widths, so a paring knife or a wider blade still has a place. If you are still choosing blades, browse our .

Will it fit on my counter and does it take up much space?
w
Wanelo · seller

The base is 95 x 95 mm and the block stands 235 mm tall, so it fits a small corner. Measure your spot first and check the clearance under any wall cabinet above it.

Can I remove the slotted core to clean it?
w
Wanelo · seller

Yes. The grey core lifts out of the stainless steel housing. Rinse it, dry it fully, then set it back in. Wiping the steel with a damp cloth keeps the brushed finish looking even.

Does the base stay put on a countertop?
w
Wanelo · seller

The black base is non-slip, so the block holds its position on a flat, dry counter. Set it down, press lightly to check the grip, then load your knives.

Why pay for stainless steel over a plastic block?
w
Wanelo · seller

Plastic blocks trap moisture and crowd the counter over time. Stainless steel is the premium choice here: it holds a clean square shape, wipes down easily and stays a permanent part of the kitchen. You buy it once and it keeps knives off the worktop every day.

Similar products

See all
Stainless Steel Knife Holder with Slotted Core Insert
$84.90