Rotating Mobile TV Stand with Height & Tilt Adjustment

Adjust the screen to every seat in the room

Rolls where the room needs it

Smooth-rolling casters move the stand easily across the floor. Press them to lock and it stays put while you adjust the screen.

Aim at every seat

The tiltable VESA plate and rotating mount turn the screen toward the table or class. Tilt it to cut window glare.

Cables stay out of sight

Rear channels keep cords tidy and off the floor, so there is nothing to trip on.

The fit numbers

• 32-80 inchSupported TV sizes
• 600x400mmMax VESA pattern

From box to running in one session

1. 1
   Check your VESA pattern

   Measure the hole pattern on your TV and confirm it fits the plate.

2. 2
   Build the base and column

   Assemble the base, casters, column and mesh shelf using the included fasteners.

3. 3
   Attach the VESA plate to the TV

   Bolt the plate to the TV, then mount the TV on the column.

4. 4
   Set height and lock casters

   Choose your height, route cables through the rear channels and lock all casters.

Everything you need to build it

• Steel column and base×1

  Matte black powder-coated

• Tiltable VESA mount plate×1

  Up to 600x400mm

• Locking casters×4

  Test each before loading

• Mesh shelf×1

  For media devices

• Fasteners and guide

  Sorted for mount and column

From one fixed wall to a screen that follows the room

Matte finish care and cable tidiness

• Wipe the finish

  Use a soft dry or slightly damp cloth on the matte black coating.

• Check bolts

  Re-tighten mount and column fasteners now and then.

• Tidy cables

  Keep cords seated in the rear channels.

• Test casters

  Confirm each caster locks before loading the TV.

Mobile stand vs wall mount