Non Electric Bidet Attachment with Adjustable Pressure

One dial, three settings, no outlet

Pressure you control

The dial has OFF, LOW and HIGH settings. Start on LOW for a gentle wash, then step up when you want more pressure. The setting you pick is the only control you need, and it holds until you turn it again.

A nozzle that cleans itself

The retractable nozzle is rinsed with its own cleaning knob. Turn it after each use and the tip is cleared before the next visit, which keeps residue from building up between uses. Dual nozzles cover rear and frontal wash.

Built for your toilet

Adjustable slotted clips grip your existing seat, and a side inlet hose runs to your fresh-water supply. Line up the nozzle and check the fit before you tighten the clips, then connect the hose.

Install it in one sitting

1. 1
   Check the clip fit

   Set the slotted clips over the rim of your toilet seat and check that the unit sits level before you tighten anything.

2. 2
   Tighten the mounting brackets

   Adjust the brackets until the nozzle lines up with the bowl, then tighten them so the unit does not shift on the seat.

3. 3
   Connect the inlet hose

   Run the side-mounted hose to your fresh-water supply valve and fasten the connection.

4. 4
   Set the dial to LOW

   Start on LOW for the first test so you can check the fittings before you raise the pressure.

5. 5
   Check for leaks

   Look over the hose connection and the clips. Tighten any fitting that weeps, then run a short test wash.

Everything to install it in one sitting

• Bidet attachment unit with control panel×1

  Glossy white body with the aqua pressure and cleaning dials.

• Mounting clips and brackets

  Adjustable slotted clips that grip the toilet seat.

• Water inlet connection hose×1

  Side-mounted hose that runs to your fresh-water supply.

What to expect over time

1. First use
   Test the pressure settings

   Start on LOW and move toward HIGH until the wash feels right. Check for leaks at the fittings and tighten the clips if the unit shifts on the seat.

2. Week 1
   Build a daily routine

   Use it after each toilet visit and rinse the nozzle with the cleaning knob. Most people settle on one pressure setting within the first week.

3. 30 days
   Check the fittings

   Look over the hose connection and clips for wear or loosening. Routine checks keep the unit working as it did on day one.

A nozzle that cleans itself

• Rinse the nozzle

  Turn the cleaning knob after each use to clear the nozzle tip.

• Check the clips

  Confirm the unit has not shifted on the seat before each use.

• Wipe the body

  Use a soft cloth and mild cleaner on the white body and aqua panel. Skip abrasive pads on the glossy finish.

Compact enough for a standard toilet

• Compact bodyFootprint
• Slotted clips on your existing seatMounting
• Side-mounted hoseInlet

Sits under the seat with room to spare around the bowl

Why this, not that