No-Drill Suction Towel Rail for Tile Bathroom Walls

One rail, multiple hooks, no screws

Holds on tile, lets go clean

Suction cups on both ends seal to smooth tile and a lever locks them down. When it is time to go, release the levers and the rail lifts off with no residue and no holes.

Several hooks, one clean line

Evenly spaced swivel hooks let a towel, a loofah and a watch hang side by side from a single mount. The rail extends, so you can fit it to the wall you have.

Built for the move you are planning

It is removable and repositionable, so it works in a rented bathroom or kitchen and goes with you to the next place. Mount it by the stove for spatulas and mitts, or by the shower for towels.

Mount it on tile in four steps

1. 1
   Pick smooth tile

   Choose a flat tile or glass patch with no grout line under either cup.

2. 2
   Clean and dry

   Wipe the wall and the cups with a dry cloth. Dust and soap film stop the seal.

3. 3
   Press the cups

   Slide the rail to the width you want, then press each suction end firmly against the wall.

4. 4
   Lock the levers

   Flip each lever to lock. Hang a light towel first to confirm the hold.

What you open

• Telescoping hook rail×1

  Glossy plastic, extendable

• Swivel hooks

  Pre-fitted, evenly spaced

• Lever suction cups×2

  One at each end

Clean the cups, keep the grip

• Wipe the cups

  Remove soap film and dust with a damp cloth, then dry.

• Dry the wall

  Wipe the tile under the cups when drips collect.

• Re-seat loose cups

  Press the cup again and re-lock the lever if it feels loose.

• Check weekly

  A quick look at both ends is enough.

Better than hooks that peel or block the door