Metal Twin Over Full Bunk Bed with Safety Guardrail
Two beds in one low, quiet steel frame. A full-length guardrail covers the top bunk, EVA pads calm the slats, and no box spring is needed.
Read the full descriptionDescription
Two beds in one low, quiet steel frame. A full-length guardrail covers the top bunk, EVA pads calm the slats, and no box spring is needed.
Sturdy twin-over-full metal bunk bed with safety guardrail, noise reduction, and no box spring needed
- Squeaky or noisy bed frames
- Need for box spring purchase
- Safety concerns for upper bunk falls
- Space constraints with low-profile height
A quieter bunk bed with a guardrail that keeps the top bunk secure
Shared rooms often mean creaking frames and an open top bunk. This twin-over-full metal bed runs quiet, adds a full-length guardrail, and needs no box spring.
Two features that answer the nightly worries
A guardrail that runs the full length
The upper bunk gets a full-length guardrail over the edge where kids roll. The frame carries CPC certification, so the safety claim is backed by a spec.

Silent nights with anti-noise pads
EVA pads on the slats take up the squeaking and rattling that wakes light sleepers in a shared room.
Matte black steel that takes daily climbing
A powder-coated steel tube frame with slatted platforms. Rated for 250 lbs on the upper bunk and 350 lbs on the lower.
Rated for 250 lbs up top and 350 below
- 250 lbsUpper bunk capacity
- 350 lbsLower bunk capacity
- 53.94"Low overall height
- 12.17"Upper guardrail height
Frame, platforms, and ladder included
- Metal bunk bed frame, upper and lower×1
Slatted platforms with anti-noise EVA pads
- Side ladder×1
Matte black rungs
From a creaky, open top bunk to a calm room
The creak that keeps you up
Every turn of the mattress sends a squeak through the frame, and a sibling below wakes up. Up top, a short rail leaves the edge open, so you glance over at bedtime and wonder.
A safer top bunk, a quieter room
A full-length guardrail covers the open edge of the upper bunk. Anti-noise EVA pads sit on the slats to cut the rattle. The frame is CPC certified and rated for 250 lbs up top and 350 lbs below.

One purchase, no box spring
The mattress sits straight on the metal slats. There is no box spring to buy, and at 53.94 inches tall the bed leaves the room feeling open.
Looking after the frame
- Recheck bolts
After one week and again at 30 days.
- Wipe clean
Damp cloth on the matte black finish.
- Check the ladder
Keep it seated for daily climbing.
Low profile for tighter ceilings
- 78.11 inLength
- 56.38 inWidth
- 53.94 inHeight
- 37.44 inClearance under upper bunk
Two beds in one footprint, about the floor space of a full bed
Fewer parts, a fuller guardrail
| This bunk bed | Standard bunk + box spring | |
|---|---|---|
| Full-length guardrail | Partial | |
| Anti-noise EVA pads | — | |
| No box spring needed | — | |
| CPC certified | Varies | |
| Extra purchase for support | None | Box spring |
Characteristics
Reviews
Questions and answers
No. The mattress sits directly on the slatted metal platforms, so there is no box spring to buy.
The top bunk takes a twin mattress and the bottom takes a full. The upper bunk is 41.42 inches wide.
The guardrail runs the full length of the upper bunk and stands 12.17 inches above the platform. The frame is CPC certified. Keep it installed whenever someone sleeps up top.
The ladder has evenly spaced rungs and matches the matte black steel frame. Tighten all bolts at setup and check them after the first week.
EVA pads on the slats cut the rattle. Any bunk can loosen with use, so recheck the bolts after a week and again at 30 days.
Over the life of the bed you skip the box spring purchase and get a full-length guardrail, a steel frame and a low profile in one buy.
Similar products
See all





