Kitchen Appliance Cord Organizer, Heat-Resistant Silicone
Wrap the cord once and it stays put. A matte silicone disc with a scalloped edge grips the cord and plug, rated heat resistant to 200°F, so toasters, mixers and pressure cookers sit tidy on a clear counter.
Read the full descriptionDescription
Wrap the cord once and it stays put. A matte silicone disc with a scalloped edge grips the cord and plug, rated heat resistant to 200°F, so toasters, mixers and pressure cookers sit tidy on a clear counter.
Stops appliance cords from unwinding and dangling, keeping kitchen counters tidy
- loose cords dangling off counters
- cords unwinding from appliances
- messy cord clutter around toasters and mixers
Cords that stay put, counters that stay clear
Before: cords trail across the counter and snag every mug. After: the excess wraps neatly, the plug stays seated, and your appliances sit where you put them.
A scalloped edge that holds the cord and plug

Grips the cord and plug
The scalloped edge catches the cord and the plug so the wrap holds in place and does not unwind.

Heat resistant to 200°F
The packaging rates the silicone heat resistant up to 200°F, so it sits comfortably beside appliances that run warm.

Tucked out of sight
It sits flat against the side of the appliance. The cord disappears and the counter stays clear.
Wrap, seat, set
- 1Wrap loosely
Loop the excess cord around the disc in even loops. Do not pull tight.
- 2Seat the plug
Press the cord and plug into the scalloped edge until it holds.
- 3Set the appliance down
Place it on the counter with the cord secured to the side.
From trailing cords to a tidy counter

The morning cord problem
The toaster cord trails across the counter and catches on your mug. Twist ties loosen with heat, velcro leaves residue, and hand-coiling needs redoing every single time. Each tug drags the appliance an inch closer to the edge.
The fix that stays put
A flat silicone disc takes the excess cord, and the scalloped edge catches the cord and plug so nothing slides loose. The cord sits against the appliance and the counter reads clear again. No drilling, no tape.
Characteristics
Reviews
Questions and answers
Yes. It is rated heat resistant up to 200°F. Keep it on the appliance side or the counter beside it, never on a heating element.
It is a compact disc that works with common appliance cords. Thicker cords may need a second wrap to stay secure, so adjust the loops until it holds.
Yes. Tuck the cord into the disc and place the mixer down with the cord secured at the side of the base.
Hand coils spring loose and need redoing after every use. The scalloped edge holds the cord and plug, so you wrap once. Over a year of daily mornings, that is hundreds of re-coils skipped, and you avoid the residue velcro can leave.
No. It wraps and grips the cord, so there are no tools to start.
Similar products
See all





