$39.90
Free delivery · 7–14 days
Stackable Metal Cabinet Shelf Riser Doubles StorageHole-Free Wall Camera Shelf for Indoor Security Cams
New
1 / 7About this itemAll characteristics
TypeHome Storage & Organization
From the seller
Your camera sits level on a clear acrylic shelf, on a wall with no new holes. The raised back plate and front lip seat the base, and the oval cutout carries the cable down the side. Built for tile bathrooms, kitchens and bedrooms where drilling is off the table.
Read the full descriptionDescription
Your camera sits level on a clear acrylic shelf, on a wall with no new holes. The raised back plate and front lip seat the base, and the oval cutout carries the cable down the side. Built for tile bathrooms, kitchens and bedrooms where drilling is off the table.
Mount a camera on the wall without drilling holes
Solves
- drilling holes in rented or tiled walls
- camera sitting unstable or askew
- cables dangling loose
Mount your camera on the wall without drilling a single hole
Your camera is either sliding on a shelf or waiting for a drill you can't use. This clear acrylic mount holds it level on the wall, and the cable runs down the side.
A flat base that keeps the lens level
A flat base that keeps the lens level
The back plate rises behind the base and the front lip holds the front edge, so the camera seats in one place. Set it down once and it stays square to the room instead of creeping toward the edge of the shelf.
The cable runs down the side
The oval cutout in the middle gives your fingers or the cable a clean path. The power cord drops past the shelf edge and runs down the wall, so nothing dangles across the tile.
Clear acrylic that disappears
Crystal clear acrylic with polished edges blends into tile, paint and stone. The wall looks the way it did before you mounted anything, and the camera is the only thing anyone notices.
Mounted in a few steps, no drill
- 1Pick a smooth, room-temperature spot
Choose a flat section of tile or painted wall, away from grout lines and heat sources like a stove. A smooth surface gives the mount its strongest grip.
- 2Wipe the spot dry
Clean the surface with a dry cloth and let it dry fully. Dust, grease or moisture weakens the hold, so do not skip this step.
- 3Press the shelf firmly
Line up the back plate with the shelf, then press and hold for the time the included instructions specify.
- 4Seat the camera and route the cable
Set the camera on the raised base, thread the cable through the oval cutout and let it run down the side. Check the seat once before you let go of the camera.
Keeping the acrylic clear over time
- Wipe with a dry cloth
Dust is the main thing that loosens the grip, so keep the contact spot clean.
- Skip abrasive cleaners
Scrubbing scratches the polished edges and dulls the clear finish.
- Check the seat now and then
If the shelf shifts or the wall gets greasy, clean the spot and reseat it.
Characteristics
Main
TypeHome Storage & Organization
Quantity2 options
Details
Reviews
Questions and answers
Will it fit my pan-tilt camera's base and cable routing?
w
Wanelo · seller
The shelf is sized for a compact indoor camera. Measure your camera's base against the shelf before you buy, and check that the power cable can leave through the oval cutout or run down the side.
What surfaces does the hole-free mount work on, and will it damage tile or paint?
w
Wanelo · seller
It is made for smooth tile, painted walls and similar hard surfaces. Clean and dry the spot first, and avoid textured grout or cold tile. If you are unsure about a painted wall, test a small hidden area first.
Can it hold a camera's weight without sagging over time?
w
Wanelo · seller
The listing does not publish a load rating, so check your camera's weight before mounting. Keep heavier devices on a solid shelf, and inspect the seat from time to time.
Is acrylic durable enough for a bathroom or kitchen wall?
w
Wanelo · seller
Acrylic is a common choice for damp rooms because it does not rust like metal brackets. Wipe it with a dry or lightly damp cloth and keep abrasive cleaners off the surface.
Why choose this over a drilled bracket or adhesive hooks?
w
Wanelo · seller
A drilled bracket leaves holes and can crack tile, and adhesive hooks let go on textured or cold surfaces. This shelf avoids both problems, keeps the camera level and hides the cable.
Is it worth the price for premium materials?
w
Wanelo · seller
You pay for crystal clear acrylic with polished edges, a raised back plate and a cutout built into the body. Compared with a patched rental wall or a lost deposit, one shelf costs far less.
Similar products
See all
Hole-Free Wall Camera Shelf for Indoor Security Cams
$35.90